Speedway Motors to Debut New Products at 53rd Annual Street Rod Nationals

(Lincoln, Neb. Aug. 1) Speedway Motors announced today a list of new products that will be debuted Aug. 4-7 at National Street Rod Association’s (NSRA) 53rd Annual Street Rod Nationals in Louisville, Ky.

The new products add to their existing offering of more than 250,000 products for street, race, muscle and truck. The new tech and products that will be featured at NSRA include:

1949-53 Ford/Mercury 11 Inch Disc Brake Kit (#91032003)

• Gain modern stopping power on your 1949-1953 Ford with our complete 11" disc brake kit.
• This kit is designed to work with your stock wheels (15" and larger).
• Features 11" cast iron rotors, loaded metric calipers, slide bolts, brake hoses, crush washers, dust caps, and all seals, bearings, & hardware.
• Serviceable design ensures good drivability and piece-of-mind when on the road.
• Comes with detailed instructions to provide a painless installation.

1954-56 Ford 11 Inch Disc Brake Kit (#91032000)

• Gain modern stopping power on your 1954-1956 Ford with our complete 11" disc brake kit.
• This kit is designed to work with your stock 15" wheels.
• Features 11" cast iron rotors, loaded metric calipers, slide bolts, brake hoses, crush washers, dust caps, and all seals, bearings, & hardware.
• Also fits 1954 Ford Crestline, 1954-1956 Customline & Mainline, 1955-1956 Fairlane, Victoria, & Crown Victoria, as well as 1955-1957 Thunderbird.
• Comes with detailed instructions to provide a painless installation.

Wheel and Tire Fitment Measuring Tool(#91603280)

• Laser cut and press bent from 10 gauge steel for strength.
• Supports measuring 14 to 20 inch diameter wheels from 7 to 17 inches in width.
• Accurate way to measure and confirm backspacing and offset using the actual tires you plan to use.
• Assembles inside your tire to verify fitment against frame, suspension, and body.
• Tool free design uses 1/4-20 carriage bolts and wing nuts to adjust and secure tool.

LS Mock-Up Block (#91089660)

• Compatible with all LS engine bolt-ons such as intake manifolds, headers, oil pan, timing cover, water pump, and accessory brackets which makes positioning or fabricating engine mounts a breeze.
• Weighing in at 18 pounds for the short block or 35 pounds for the long block it can be lifted in and out of the vehicle for mockup by one person without the need for an engine hoist.
• Replicates all LS Gen III and Gen IV engine applications such as LS1, LS2, LS3, LS6, LS7, LSA, and Vortec truck engines 4.8L, 5.3L, 6.0L and 6.2L.
• Heavy duty 12-gauge steel construction is designed to last unlike foam versions which often suffer damage from thread inserts pulling out of the foam core.
• Long block version comes with bolt on fabricated steel mockup heads | Short block version accepts all factory and aftermarket LS heads.

LS Valley Cover Plate (#9101788)

• Fits Gen 3 LS engine (LS1/LS6) 10-bolt applications only.
• CNC machined from 1/4-inch thick 6061-T6 aluminum.
• Deletes factory knock sensors for cleaner look when using aftermarket LS swap wiring harness.
• Available in raw aluminum or black anodized finishes.
• Includes countersunk hex drive flat head fasteners for a smooth look.

Digital LED Water/Oil Gauge (#91130305)

• Monitor oil pressure, water temperature, and voltage in one single gauge.
• 2-1/16-inch gauge size mounts directly in dash or in gauge mounting cup.
• Scrolls through each gauge reading or can be set to display just one.
• Matt black gauge face and bezel goes with any interior.
• Simple four wire connection with easy-to-read white LED display.

1970-81 F-Body Splined Sway Bar Kit (#91670811)

• 1.25-inch 4130 chromoly steel front sway bar 38.6-inches long.
• Direct bolt in replacement for stock front sway bar on 1970-1981 "2nd Gen" Camaro/Firebird.
• Reduces body roll to enhance handling while providing room for extra wide front tires.
• Splined sway bar features adjustable end links and works with stock or tubular front lower control arms.
• Billet aluminum mounting blocks use standard polyurethane sway bar bushings/brackets, no modifications to frame or suspension needed.

Flush Mount Tail Lights (#91603094)

• This unique kit combines the classic clean round shape and domed lens with a custom billet aluminum trim ring.
• Each taillight utilizes 14 LED bulbs that are much brighter than the older 1157 style, don't put out much heat, and last up to 100,000 hours.
• Makes the perfect finishing touch on a wide variety of street rods and customs.
• Kit includes all-steel buckets that allow you to "French" your taillights into the body, providing a clean flush-mount look.
• Easily adaptable to a wide variety of vehicles.

Hairpin Cover (#91603096)

• Covers rear pivot on hairpin or split wishbone radius rods.
• Bolt-on or rivet installation.
• Can be used anywhere as an aerodynamic shield.
• Aluminum construction, fully polished.
• Measures 6" L x 4-3/4" W x 1-9/16" H.

Universal Sway Bar Kit (#91664725)

• Universal application for any chassis or suspension type.
• Reduces body roll and understeer.
• Adjustable end links for fine tuning, works with OEM and tubular control arms.
• 5/8" OD splined torsion bar.
• Bronze sway bar mount bushings.

Speedway Motors customer Bob Timmerman’s homebuilt ’36 Chevy Coupe will be on display in Speedway Motors’ booth at NSRA Street Rod Nationals.

Follow Speedway Motors on Facebook and Instagram for additional event coverage. For more information about Speedway Motors’ new products visit SpeedwayMotors.com.

About Speedway Motors, Inc. Speedway Motors is a manufacturer, retailer and distributor of high-quality automotive parts and racing products. Celebrating their 70th Anniversary, Speedway Motors has been committed to providing a broad selection of high-quality, affordable automotive parts—delivered quickly, efficiently and without any hassles since 1952. Their products and expert advice are available to customers by calling 1.800.979.0122, online or at retail stores in Lincoln, Neb. and Tolleson, Ariz.