Menu

Shop

Garage

Cart

Account

Products to Compare (max of 3)
X
Compare These Parts

Chevy II Nova Gasser: Week to Wicked Day Five Recap

8/17/2019
Add Article To List

It's day five of our Week to Wicked build. We want to get everything fired up. We have some Thermo Tech to throw down, subframe connectors, a little bit more wiring and we'll get out of the way for the lettering on the car. And after that, we're going to make a whole bunch of noise around town!

Jeff starts with putting the rest of the steering column together. Turn signal lever, tilt lever, hazard button, and then the column should be done. Christian runs the battery cable from the trunk up to the front. Zach is working on putting the heat insulation down, using a roller helps get all the air bubbles out.

We installed our Stewart Warner Green Line Tach in a Speedway Motors mounting tach cup. We're clamping it on the steering column as they did in the 1960s. Jason installed a radiator overflow because any track you go to will require a recovery system. We also added Speedway's universal bucket seat slider tracks to the seat, so we can adjust the seats for everyone.

Jeff Styles is here to add the lettering to the car. Because of time, Jeff uses a stencil to airbrush the artwork on. While he works on that, Joe fires up the Nova for the first time! Feeling it rattle your ears is something to celebrate.

Our guys head back home while Jeff finishes the lettering. When all of that is done, Jason and Christian take the Nova around town and let her loose! We had a ton of fun on the build and can't wait to show you what we have in store for the future. Thanks for following our Chevy II Nova Gasser Week to Wicked build!

Products Featured in this Article

Related Articles

Chevy II Nova Gasser: Week to Wicked Gasser Front End
by Joe McCollough - Posted in Videos
10/11/2019
To get the nose-up drag car look that we wanted for our Week to Wicked Nova project, we used one of our Gasser Axle kits. These bolt on in place of the stock front clip and instantly transform the car, making it look like it rolled right out of the 60's!
Chevy II Nova Gasser: Week to Wicked DeWitts Radiator
9/27/2019
Our 496 big block Chevy cranks out heat in our 1967 Chevy II Nova. We selected a DeWitts Direct Fit HP Radiator that looks the part and keeps our big block cool.
Chevy II Nova Gasser: Week to Wicked Rearend
by Joe McCollough - Posted in Videos
9/23/2019
Our Week to Wicked Nova makes some serious power. We selected a few parts that will put all that power to the ground and withstand the abuse.
Chevy II Nova Gasser: Week to Wicked Restoration Parts Exterior
9/20/2019
Speedway Motors offers a variety of exterior restoration parts, so you don't have to search the junkyard or visit every swap meet. See the products that we selected for our 1967 Chevy II Nova Gasser build.
Chevy II Nova Gasser: Week to Wicked Restoration Parts Interior
9/20/2019
Check out the interior restoration parts that we used for our 1967 Chevy II Nova Gasser build.
Chevy II Nova Gasser: Week to Wicked Wiring Harness
9/20/2019
Learn about the Speedway Motors Universal 22 Circuit Wiring Harness and the features that made it perfect for our 1967 Chevy II Nova Gasser Build.
Slicks go on, Car Comes off the Lift, and the Finish Line Approaches
by Speedway Tech Team - Posted in News
8/16/2019
Jason also lights a table on fire, but that’s not as exciting as seeing how the Chevy II Nova sits with all the cool stuff underneath. Not much looks as good as drag slicks.
Chevy II Nova Gasser: Week to Wicked Day Four Recap
8/16/2019
Our Chevy II Nova Gasser is looking like a real car! Today we're jumping into more wiring, interior, steering column, and wheels and tires.
Time Flies When You’re Wiring
by Speedway Tech Team - Posted in News
8/15/2019
Day one and two were all about the big stuff. Day three was the opposite. Which isn’t to say we didn’t enjoy ourselves. Needless to say, we were glad to have Steve’s energy on the details day.
Chevy II Nova Gasser: Week to Wicked Day Three Recap
8/15/2019
We have a full day ahead of us with the radiator core support, getting all the sheet metal back on, and wiring the engine. Check out day three of our Chevy II Nova Gasser build!