Menu

Shop

Garage

Cart

Account

Products to Compare (max of 3)
X
Compare These Parts

Seat Installation - 410 Sprint Car Build

7/17/2019
Add Article To List

Today we’re going to be installing the seat and seatbelts. This Butler seat that we’re using is just a placeholder. Whoever wins the car in the raffle will receive their own custom seat.

The guys are installing the 5-Point Ratchet Seat Belt Set. This product is very user-friendly because you can adjust the seatbelt to your own desired tightness. When installing the seatbelt, it’s important to make sure all of the bolts are securely tightened and can't pull through. Once the belt is at the desired length, you can roll up the excess material and zip tie it together. You want the belt to go over the highest tube to your shoulders. Our team prefers to use 2-inch shoulder belts, as opposed to the 3-inch options, because they fit the Hans device better and are more comfortable. The guys take some time installing the grade 8 bolts because they need to be longer for the seat. Then, we wrap up the day putting in the seat upholstery and feeding the belts through.

Thanks for tuning in and be sure to check out our next episode!

Products Featured in this Article

Related Articles

Brakes - 410 Sprint Car Build
by Speedway Tech Team - Posted in Tech
8/28/2019
Check out the 410 sprint car brake installation and bleeding the brakes! We're making serious progress on our build.
Wheels and Tires - 410 Sprint Car Build
9/9/2019
We’re putting Weld Racing Wheels and tires on our 410 Sprint Car and finally dropping it on the ground. Check it out!
Shocks - 410 Sprint Car
by Speedway Tech Team - Posted in Tech
9/6/2019
Today, we're following along as Jason Martin builds the Pro Shocks for our sprint car and installs them. There's lots to learn from this episode!
Rear Axle Installation - 410 Sprint Car Build
by Speedway Tech Team - Posted in Tech
7/24/2019
Check out our 6th episode of the 410 Sprint Car Build series. Last time we assembled the rear axle and now we are installing it!
Rear Axle Assembly - 410 Sprint Car Build
by Speedway Tech Team - Posted in Tech
7/24/2019
Learn how to assemble a rear axle assembly as we put together ours for the 410 Sprint Car Build. Our team of builders continues to make progress on the car!
Steering/Gauges - 410 Sprint Car Build
by Speedway Tech Team - Posted in Tech
7/10/2019
Today, the power steering gear and gauges are being installed on our 410 Sprint Car Build by team Fricke.
Engine Build and Dyno - 410 Sprint Car Build
by Joe McCollough - Posted in Videos
1/15/2021
Our sprint car is back, and it's ready for some power. Follow along as Speedway Motors Racing Engines puts together a thundering 410.
Front Axle Assembly - 410 Sprint Car Build
by Speedway Tech Team - Posted in Tech
8/12/2019
Today on our 410 sprint car, the guys are assembling the front axle. The process can be a bit messy, but the finished product is so worth it!
Brake Lines/Motorplate Installation - 410 Sprint Car Build
7/5/2019
Learn how to install the floor plan, brake lines, and motorplate in a 410 sprint car as we launch our 410 Sprint Car Build.
Wings Install - 410 Sprint Car Build
by Speedway Tech Team - Posted in Tech
9/25/2019
Watch as we put the wings on our 410 Sprint Car. We complete our build with nose and top wing, sideboards, and bumpers. Learn about the install in our video.