Help is just a click away!
Click here to chat with a Speedway Team Member
💬
Online - Chat with us!
Chat
Products to Compare (max of 3)
X
Compare These Parts
Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Customer Service
Since 1952
in
in
Talk to the Experts. Call 800.979.0122
Shop By
Support
Account
Street Race Truck More... The Toolbox

Tech Talk: Roll Cage Tube Joint Tubing Notcher

5/6/2019

When you first remove the tubing notcher from the box, the rounded portion will be on the flat side of the clamp. Make sure to rotate the tubing holding bracket fixture so the rounded side is on the V-side of the clamp to avoid the set screw putting a dent or kink in your tubing. This product comes with instructions, Spanner wrench, 1-3/4" hole saw blade and threaded reducer. The protractor on the tubing notcher allows you to set the degree that you want the pipe to lay, not the degree of the actual cut. To set the angle, tighten the nut on the slotted hole and the center nut to help hold it in place. This is the best tubing notcher for your needs.

Products Featured in this Article

Related Articles

Tech Talk Bert Sprint Car Starter
by Jason Martin - Posted in Videos
12/27/2018
If you are working on your car and need to start the motor, especially during winter, learn how to install and use the Bert Sprint Car Starter from our very own Jason Martin.
Tech Talk Sprint Car Front End Squaring
by Jason Martin - Posted in Videos
12/18/2018
Jason Martin explains how to square the front end of a sprint car. He walks through the step by step process of squaring the front axle, adjusting the radius rods and setting the side to side. Check it out!
Tech Talk Omega Kustom 3-N-1 Gauge Set
by Darrian Wedding - Posted in Videos
12/6/2018
Darrian explains how to program the Omega Kustom 3-N-1 Gauge in the third and final video of the series.
Tech Talk Omega Kustom 5 Gauge Set
by Darrian Wedding - Posted in Videos
12/3/2018
Check out the second video on how to program Omega Kustom Gauges!
Tech Talk Omega Kustom Quad Gauge Set
by Darrian Wedding - Posted in Videos
11/28/2018
Darrian demonstrates how to program our Omega Kustom Quad Gauges. Check it out!
In The Shop with Driven Racing Oil - Zinc
by Outside Author - Posted in Videos
11/15/2018
Lake Speed Jr., from Driven Racing Oil, discusses how to choose the motor oil with the right amount of zinc for your vehicle's unique needs.
Tech Talk - Hooker Muffler
by Pat Orth - Posted in Videos
9/26/2018
Pat shows that exhaust can make a difference on even your daily driver. Check out this video of Pat with the Hooker Muffler installed on his '03 Suburban.
In The Shop with Driven Racing Oil - Viscosity
by Outside Author - Posted in Tech
9/14/2018
Lake Speed Jr., from Driven Racing Oil, answers the question "what viscosity grade should I run". He explains what viscosity really means and some key factors to keep in mind when selecting the right viscosity grade for your engine and application.
Project Chevelle Episode 4: Power Steering
6/18/2018
Today we are installing original style pump, pulleys, brackets, and hoses! Watch as Joe and Zach improve the ratio and make driving the Chevelle easier.
Project Chevelle Episode 3: Wheels and Tires
by Joe McCollough - Posted in Videos
5/30/2018
Project Chevelle gets new wheels and tires, and a massive personality change! Watch as we add a huge dose of visual horsepower to the old Chevelle.
Suggestions
Error
X
Note
X
Ok