Menu

Shop

Garage

Cart

Account

Products to Compare (max of 3)
X
Compare These Parts

Comet Pedal Car Custom

10/31/2016
Add Article To List

Hands-down, street rodding has always been about individuality and creativity. It’s from that builder’s spirit that the Speedway Comet Pedal Car Kit was born. Whether hot rod, lead-sled or gasser, the sky’s the limit on how you decide to build it! In the following article I’ll show you how I customized one, both in appearance and purpose, for our youngest son Max.

I must preface that I’ve always felt a pedal car was a relatively limited use item. Once a kid is big enough and strong enough to pedal and steer the car, they’ve almost grown out of it. My remedy to this was to make it into a toy that Max could enjoy and that would adapt to him as he got bigger. Most importantly, I wanted him to be able to use it right now and for it to be totally customized and distinct from all the other kid cars out there.

I started with a freshly unpacked 918-0040 Comet Pedal Car kit. The first thing I wanted to modify were the headlights. My favorite customs all seem to have frenched headlights. It turns out that traditional “pencil tip” decorative exhaust tips fit the bill quite nicely. Shown here being fit into openings cut with a holesaw in the body. I also think a more radical kustom version could be cool with canted quad headlights. (perhaps next winter)

The next kustom touch that I wanted to be sure to incorporate was a traditional peaked and bullnosed hood. For this I formed ¼” steel rod along the center of the hood and slowly spot welded it in place after I got the perfect shape at the nose. The sides of the bullnose were filled with bits of sheet metal and the entire seam was spotted in until continuous, then ground smooth.

The next task to be tackled was to create a chassis that could handle all the tasks being asked of it and supply the required low ride height. All, of course, while remaining as light as possible. In order to achieve these goals the inner structure above the front wheel opening (spot welded inside the body) was removed, allowing the front wheels and tires to nest farther into the body. To keep the framework light and simple, the original steering assembly was retained but welded to a central tube-based frame.

As you can see here, the framework is very simple and features removable floor boards to still allow use as a kid-powered, ride-in toy later on.

Another part of the required functionality was to be able to use the pedal car as both a pulled wagon and a push from behind stroller with minimal changeover time. That was accomplished via the use of a caster that barely lifts the front tires off the ground. This eliminates the need for locked steering or perfect alignment of the front wheels to use as a pushed vehicle. It also greatly reduces the turning radius of the stroller. The caster mounts in the same threaded insert that the pivot point of the wagon yoke does. Simply unpin and remove the push handle, remove the caster, install the wagon handle/yoke in its place and it becomes a wagon.

I’m not going to lie. The body work was a challenge and did require a fair amount of work to make it acceptable for shiny paint. I didn’t try terribly hard to metal finish the body. In hindsight, I probably would have spent more time on the metalwork prior to filler. As it was, Rage filler sands easily and helped make quick work of the custom body work, filled seams and straightening out the roughness left by the stamping and welding processes used to create the body.

My helper thought the primer was a chalkboard.

Once the filler was sanded flat and the block sanding and priming was all done I painted the little car the same color as our street rod. I used Speedway's 728-19023 Titan Spray Gun as well as the 728-19990 holder and finer 728-19100 tip. The paint was Nason Fleet Base/Clear Urethane. Bright Blue.

Basecoat application
Clearcoat application

Once the paint had set-up and final assembly was done, I added wiring and 2” low voltage lights, as well as a horn (bad idea) to the mix. A mobility scooter battery provides power for the accessories. I covered panels for the seat and the floor boards with pleated vinyl for a custom tuck-n-roll interior. The inside of the body was also painted ivory to emulate a white interior. Seat belts were also added to thwart repeated bail-outs.

Following final interior and electrical assembly, pinstriping, airbrushed trim and finishing touches were added. And, like any good car guy in training, a hand wash was naturally in order.

Products Featured in this Article

Related Articles

Speedway Tech Talk - Pedal Cars, Parts & Accessories
by Tim Matthews - Posted in Videos
9/6/2016
Tim touches briefly on some of the pedal car parts we have to offer.
Model A Pedal Car Assembly
7/30/2020
Learn how to assemble our Model A pedal car. Jess Gasper leads you through the process and shares her experience as well as tips and tricks.
Pedal Car Vinyl Production
2/14/2018
Learn about the versatility in pedal car graphics starting in the 50's and 60's. See what all goes into the production of pedal car vinyl from choosing high quality vinyl to designing the graphics and cutting the vinyl for the most accurate reproduction.
How to Install Pedal Car Vinyl Graphics
5/4/2018
Jess M. gives you a step by step process on how to apply vinyl graphics to your pedal car. Each step is explained through pictures and detailed instructions.
Murray Comet Pedal Car Assembly
12/18/2017
Learn about 'Speedy' Bill's passion for pedal cars and how that has been passed down through generations in the Smith family. Jess also explains the step by step process to assemble Speedway's Murray Comet style pedal car.
NHRA Rules For Newbies & Drag Racing Safety Requirements
by Dan Schechner - Posted in Tech
5/21/2025
Gear up for your first drag race with this beginner’s guide to NHRA rules and required safety equipment.
What Is an HEI Distributor? Setup, Tuning Tips, and Pros & Cons
by Brian Caruth - Posted in Tech
5/15/2025
Learn how HEI distributors work, how to wire and install them, and why they’re a top upgrade over points ignition systems. Includes tips on testing, vacuum advance, and DUI distributor benefits.
Best Type of Mufflers to Create the Perfect Exhaust Note
by Mark Houlahan - Posted in Tech
5/14/2025
From glasspack, turbo, and chambered mufflers, to resonators, and more, which muffler is best for you? See our guide to learn more.
Axle Ratio Calculator | Calculate Ideal Tire Size & Rear Gear Ratio
by Mark Houlahan - Posted in Tech
5/13/2025
Easily calculate the best axle ratio or tire size for your build. Use our axle ratio calculator to match RPM, gear ratio, and tire diameter for optimal performance.
Fuel Filter Micron Ratings | Everything You Need to Know
by Mark Houlahan - Posted in Tech
5/7/2025
Why are fuel filters offered in different micron ratings, and which one is right for your build? Learn why EFI and carbs take different filters.