Help is just a click away!
Click here to chat with a Speedway Team Member
💬
Online - Chat with us!
Chat
Products to Compare (max of 3)
X
Compare These Parts
Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Since 1952
in
in
Talk to the Experts. Call 800.979.0122
Shop By
Support
Account
Street Race Truck More... The Toolbox

Racing Wheel Guide: Design, Torque, Offset and Backspacing

9/15/2016
Why Change Wheel Offset?

Most of us know that changing wheel offset changes the way your car handles. On a race car, we use different offsets to help tune the chassis to the track conditions. When you change wheel offsets, it changes the amount of weight that the tire puts to the ground. We suggest that you put your car on scales and record the weight differences when you change wheel offsets. This will allow you to make proper chassis changes at the track.

How to Measure Backspacing

It's important to have the proper backspace to ensure you have proper clearance inside your inner wheel well and fender. The backspace or offset is measured from the inside lip of the wheel to the inside of the flange mount. The smaller the number the closer the flange will be to the inside of the wheel.

Torquing the Wheels

The average race wheel sees a tremendous amount of pressure and abuse in its short lifetime and with a few simple tips, it may mean the difference between winning and losing.

We don’t think twice about torquing the heads or mains on a race engine but seldom do we see anyone doing the same with their wheels. Did you know if you use an impact wrench and just hammer the nuts on, there is a good chance you will end up warping the brake rotors the next time out?

Just like the heads on your engine if all the bolts are not torqued the same, you run the chance of warping them when they get hot.

Torque your wheels using a star pattern rather than just tightening them up in order. The same goes with the beadlocks. If you just crank the bolts down you run the risk the tire will not be centered on the wheel correctly. Take your time and use the star pattern.

Lug Nuts

Most racing wheels have a 45 degree taper for the lug nut to seat against, while most street wheels have a 60 degree taper. With a 45 degree taper, the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble! All of our racing lug nuts will have a 45 degree taper and are designed to be used with racing wheels.

Wheel Bolt Pattern Measurement

Bolt patterns are simply the measurement of an imaginary circle that lies across the center-line of the lugs. Whether you are looking to adapt or match a new set of wheels, we have a simple guide to help you estimate your bolt circle.

No need to guess any longer! Speedway Motors has a precision bolt circle template that simplifies the most common 5 lug patterns for you. Check out our bolt circle template; a must-have tool for the shop or swap meet. Check out our guide on wheel bolt pattern measurement to learn more.

See our video about measuring wheel bolt patterns:

Products Featured in this Article

Related Articles

Real Rodder Wheels for Elmer
by Jeff Karls - Posted in Tech
7/23/2020
This article features a set of Real Rodder street rod wheels installed on Jeff's Sedan Delivery.
Wheel Offset vs Backspacing Explained
by Joe McCollough - Posted in Tech
9/21/2018
This guide explains the difference between offset and backspacing when measuring wheels for your hot rod, muscle car or race car with helpful diagrams.
Wheel Lug Nut Size Guide + Torque Spec Chart
by Speedway Tech Team - Posted in Tech
9/15/2015
5 easy steps to select and install the proper lug nuts for your vehicle's aftermarket wheels. This lug nut guide covers all you need, including torque specs.
Vintage Mag Wheel Restoration
by Jeff Karls - Posted in Street Rod
6/4/2020
Learn how to restore vintage 200S mag wheels. These steps ensure a smooth and successful restoration and installation.
How To Measure Wheel Bolt Pattern
by Speedway Tech Team - Posted in Tech
8/4/2019
Learn how to measure wheel bolt circles with our wheel bolt pattern guide. Use this chart to make sure the rims you order match your wheel bolt pattern and fit your vehicle.
Racing Wheels - Construction and Styles
by Speedway Tech Team - Posted in Tech
10/8/2018
Check out this article to learn about why it's important to choose the right wheels for your race car and which types to choose.
Project Chevelle Episode 3: Wheels and Tires
by Joe McCollough - Posted in Videos
5/30/2018
Project Chevelle gets new wheels and tires, and a massive personality change! Watch as we add a huge dose of visual horsepower to the old Chevelle.
Project Chevelle: Wheels and Tires Tech Article
by Joe McCollough - Posted in Tech
5/30/2018
Wheels and tires can make a huge difference in the appearance of any car. We find out just how true this is on Project Chevelle.
Wheel Offset Explained
by Frank Galusha - Posted in Tech
4/11/2018
What is wheel offset and how can it improve your car's performance? Our wheel offset guide is your key to understanding wheel offset for your race car.
Mud Cover Mounting Tabs and Locator Tool
by Jared Cote - Posted in Tech
2/23/2018
Many sanctioning bodies now require mud covers to be bolted to the wheel and the mounting tabs to be integral or welded to the wheel. This article explains how to properly bolt on mud covers and the tools required to do so.
Error
X
Note
X
Ok