Chevy Chevelle Clutch Master Cylinders

Jeff demonstrates how to plumb the brake master cylinder with steel lines in his 1967 Chevelle. See tips on how to bend brake lines, use flare tools to make double flares, and give hard lines some spring.

Learn how to bench bleed a new master cylinder properly to prevent on-car brake system bleeding issues. Removing the air before installation is critical and this video tutorial will walk you through the process.

Follow this guide to learn how the change of bore size on a master cylinder affects a four-wheel disc brake system. View the conversion chart to figure the total bore area for your brake setup.

Jeff demonstrates the installation of front brake lines and hoses for his 1967 Chevelle. Learn how he uses a Titan mini-bender for all the tight bends this job required and an important tip on sealing pipe threads.

Over several generations of small block Chevy (and big block Chevy) engines there have been several changes that dictate what flexplate works with them. We’ll help you determine the correct flexplate for your Chevy engine in this buyer’s guide.

This article highlights the finishing touches of the front suspension in Jeff's Chevelle. Learn some tips on how to install the steering arms, center link and tie rod assembly.

Kevin W. walks through each step of installing a new alternator bracket on a 454 Big Block Chevy.

Learn about the G Force crossmember and how the symmetrical product design makes for a smooth installation on Jeff's 1967 Chevelle.

Take a look at a few of the rare and wonderful Chevy engines in the Museum of American Speed!

We finally get to drive Project Chevelle after the big engine swap, and it's pretty awesome. Rowing through the gears with our new Tremec 5-speed isn't bad either!