1966 Studebaker Commander Brakes

1,703 products fit your

1966 Studebaker Commander

Add Engine

Show Direct Fit Parts

1,703 products

Sort By:

Clear All

Fitment

1966 Studebaker Commander

Department

Street

Application

Muscle Car

Products

-7%

Earls |

#425AT981504ERL

Earls AT981504ERL -4 AN Male Straight Union, Anodized Aluminum

Fitting End A:

-4 AN Male

Fitting End B:

-4 AN Male

Angle:

Straight

$7.43

/each

$8.03

90 Degree 1/8 Inch NPT to 7/16-24 IFF Adapter Fitting

Speedway Motors |

#91031817

90 Degree 1/8 Inch NPT to 7/16-24 IFF Adapter Fitting

(3)

Fitting End A:

1/8" NPT Male

Fitting End B:

7/16"-24 I.F. Female

Angle:

Straight

$8.99

/each

-28%

Tuff Stuff |

#7452026NA

Tuff Stuff 2026NA Dual Reservoir Dual Ported Master Cylinder 1 In

Outlet Count:

Tandem

Outlet Fitting:

3/8"-24 IFF

$204.99

/each

$285.10

-9%

QA1 ALN12130K Pro-Rear System Ride Sensitive, 130Lb

QA1 |

#721ALN12130K

QA1 ALN12130K Pro-Rear System Ride Sensitive, 130Lb

Suspension Height Adjustment:

0.0-1.5 Inch Lowered

Rear Coil Springs Included:

Yes

Spring Rate:

130 lbs.

$772.95

/kit

$856.31

-6%

Wilwood |

#83522010685

Wilwood 220-10685 10 Inch Universal Flexline Rear Brake Line Kit, PB

Position:

Rear

Brake Hose Size:

-3 AN

Brake Hose Length:

10"

$99.55

/each

$106.88

Over the Top ’66 C10

Blown 1966 Chevy C10 built for cruising.

1966 Chevelle

Sometimes, a simple paint job can cause a project to spiral out of control. In the case of Steve's '66 Chevelle, it came out way better than anyone expected.

How to Install Rear Brake Lines - 1967 Chevelle

Jeff preps the rear end housing to secure the brake lines and shows how to fasten bolt-on brake line tabs on the lower trailing arm bracket. Follow along as he applies Wilwood Dynalite Calipers to his 1967 Chevelle.

Updating the brakes on a '51 Deluxe

In this Tech Tip, John makes a few suggestions for a customer looking to update the braking system on his ’51 Deluxe.

Installing Wilwood Front Brakes - 1967 Chevelle

Jeff installs a Wilwood 12.19" Front Disc Brake Kit to his 1967 Chevelle. Read more on the caliper bracket assembly and brake rotor setup.

Brakes - 410 Sprint Car Build

Check out the 410 sprint car brake installation and bleeding the brakes! We're making serious progress on our build.

Corey's 1966 Nova SS

A modern heartbeat with classic vibes gives Corey Petska's 1966 Nova SS a second chance around.

Converting a Manual Brake System - 1967 Chevelle

Jeff converts his 1967 Chevelle manual brake system to power by installing a Delco booster kit. Learn how to make the master cylinder more resistant to brake fluid and a few tips for an easy install.

Master Cylinder Brake Lines - 1967 Chevelle

Jeff demonstrates how to plumb the brake master cylinder with steel lines in his 1967 Chevelle. See tips on how to bend brake lines, use flare tools to make double flares, and give hard lines some spring.

Replacing Front Control Arms - 1967 Chevelle

Next up is the suspension on Jeff's 1967 Chevelle project. Learn how to properly disassemble and remove components, such as the spindles and brakes. See tips on replacing the control arm bushings and using the right tools to get the job done.

Mustang II IFS, Drop Spindles, 700 Coilovers, Manual Rack, 4-1/2

Speedway Motors |

#9109718

Mustang II IFS, Drop Spindles, 700 Coilovers, Manual Rack, 4-1/2

Front Suspension Type:

IFS

Suspension Height Adjustment:

Lowered

Control Arm Style:

Tubular

$2,266.99

/kit

$240 Off

QA1 DM501-12130 Pro-Rear System MOD Series, 130Lb, 3 Inch

QA1 |

#721DM50112130

QA1 DM501-12130 Pro-Rear System MOD Series, 130Lb, 3 Inch

Suspension Height Adjustment:

0.0-1.5 Inch Lowered

Rear Coil Springs Included:

Yes

Spring Rate:

130 lbs.

$2,229.95

/kit

$2,470.42

Tuff Stuff |

#7452028NA

Tuff Stuff 2028NA Dual Reservoir Master Cylinder, 1-1/8 In Bore

Outlet Count:

Tandem

Outlet Fitting:

1/2"-20 IFF

$272.99

/each

Wilwood |

#83512011870P

Wilwood 120-11870-P D154 Single Piston Floater Caliper, Polished

Caliper Pistons:

One

Parking Brake Provision:

Fittings Included:

$389.48

/each

Wilwood |

#83526015541BK

Wilwood 260-15541-BK Compact Tandem Master Cylinder w/ Pushrod

(1)

Master Cylinder Bore Size:

1-1/8 Inch

Master Cylinder Material:

Aluminum

Finish:

E-Coat

$365.21

/each

Wilwood |

#83534015677

Wilwood 340-15677 Forward Swing Forged Pedal Assembly

Master Cylinder Mount Type:

Forward

Sold in Quantity:

Each

$216.56

/each

Wilwood |

#83526014960BK

Wilwood 260-14960-BK Compact Tandem Master Cylinder

Master Cylinder Bore Size:

1-1/8 Inch

Master Cylinder Material:

Aluminum

Finish:

E-Coat

$365.21

/each

Mustang II IFS, Drop Spindles, 500 Coilovers, Power Rack, 4-1/2

Speedway Motors |

#9109715

Mustang II IFS, Drop Spindles, 500 Coilovers, Power Rack, 4-1/2

Front Suspension Type:

IFS

Suspension Height Adjustment:

Lowered

Control Arm Style:

Tubular

$2,327.99

/kit

Mustang II IFS, Drop Spindles, 375 Coilovers, Manual Rack, 4-3/4

Speedway Motors |

#9109704

Mustang II IFS, Drop Spindles, 375 Coilovers, Manual Rack, 4-3/4

Front Suspension Type:

IFS

Suspension Height Adjustment:

Lowered

Control Arm Style:

Tubular

$2,332.99

/kit

Lokar |

#49170BHR

Lokar 70-BHR Billet Hand Brake Boot Ring

Sold in Quantity:

Each

GTIN Code:

815470007592

$77.95

/each

Speedway Disc Brake Residual and Proportioning Valves, 2 PSI

Speedway Motors |

#9109803

Speedway Disc Brake Residual and Proportioning Valves, 2 PSI

(2)

Proportioning Valve Type:

Knob Adjustable

Port Quantity:

2-Port

Material Type:

Aluminum

$82.99

/kit

$240 Off

QA1 DM501-1501 Pro-Rear System MOD Series, 150Lb, 3 Inch

QA1 |

#721DM5011501

QA1 DM501-1501 Pro-Rear System MOD Series, 150Lb, 3 Inch

Suspension Height Adjustment:

0.0-1.5 Inch Lowered

Rear Coil Springs Included:

Yes

Spring Rate:

150 lbs.

$2,229.95

/kit

$2,470.42

Wilwood Remote Tandem M/C Kit W/ Bracket And Angled Valve, 1 Bore

Wilwood |

#83526116962

Wilwood Remote Tandem M/C Kit W/ Bracket And Angled Valve, 1 Bore

Master Cylinder Bore Size:

1 Inch

Master Cylinder Material:

Aluminum

Sold in Quantity:

Kit

$497.42

/each

-28%

Tuff Stuff |

#7452026NC

Tuff Stuff 2026NC Dual Reservoir Dual Ported Master Cylinder 1 In

Outlet Count:

Tandem

Outlet Fitting:

3/8"-24 IFF

$207.99

/each

$289.50

Brake Line Pressure Port Switch with Bullet Receptacles, 1/8 NPT

Speedway Motors |

#91605126

Brake Line Pressure Port Switch with Bullet Receptacles, 1/8 NPT

(5)

Thread Pitch:

1/8-27 NPT

Sold in Quantity:

Kit

$16.49

/each

Aluminum Flare Union Adapter Fitting, Blue, -6 AN

Speedway Motors |

#6176035

Aluminum Flare Union Adapter Fitting, Blue, -6 AN

(6)

Fitting End A:

-6 AN Male

Fitting End B:

-6 AN Male

Angle:

Straight

$8.99

/each

Wilwood |

#83515011363K

Wilwood 150-11363K 4812 BP-10 Brake Pad Set, .49 Inch Thick

Quantity Included:

Sold in Quantity:

Set

$92.90

/each

Wilwood |

#83514012099BK

Wilwood 140-12099-BK D154 Front Brake Caliper Kit, Black Anodized

Caliper Pistons:

Two

Fitting Attachment 1:

Banjo

Parking Brake Provision:

$501.07

/each

Power/Manual Master Cylinder, 1-1/8 Inch Bore w/Bleed Kit

Speedway Motors |

#9100477

Power/Manual Master Cylinder, 1-1/8 Inch Bore w/Bleed Kit

Master Cylinder Bore Size:

1-1/8 Inch

Master Cylinder Material:

Cast Iron

Finish:

Natural

$139.99

/kit

Wilwood |

#8351607099BK

Wilwood 160-7099-BK SRP-BLK 30 Vane Iron Rotor, 11 Inch, R/H

Rotor Diameter:

11 Inch

Rotor Material Type:

Iron

Rotor Thickness:

0.81"

$225.10

/each

$243 Off

QA1 DM501-1301 Pro-Rear System MOD Series, 130Lb, 3 Inch

QA1 |

#721DM5011301

QA1 DM501-1301 Pro-Rear System MOD Series, 130Lb, 3 Inch

Suspension Height Adjustment:

0.0-1.5 Inch Lowered

Rear Coil Springs Included:

Yes

Spring Rate:

130 lbs.

$2,249.95

/kit

$2,492.58

Wilwood |

#83533016239

Wilwood 553-16239 Replacement Girling Cap, Remote Master Cylinder

GTIN Code:

889545098952

Sold in Quantity:

Each

$9.04

/each

Brake Line Tubing Cutter and Flaring Tool Kit

Speedway Motors |

#91607114

Brake Line Tubing Cutter and Flaring Tool Kit

Sold in Quantity:

Kit

Material Type:

Steel

$136.99

/kit

-9%

QA1 ALN12110K-1 Pro-Rear System Ride Sensitive, 110Lb

QA1 |

#721ALN12110K1

QA1 ALN12110K-1 Pro-Rear System Ride Sensitive, 110Lb

Suspension Height Adjustment:

0.0-1.5 Inch Lowered

Rear Coil Springs Included:

Yes

Spring Rate:

110 lbs.

$772.95

/kit

$856.31

$240 Off

QA1 DM501-1101 Pro-Rear System MOD Series, 110Lb, 3.25 Inch

QA1 |

#721DM5011101

QA1 DM501-1101 Pro-Rear System MOD Series, 110Lb, 3.25 Inch

Suspension Height Adjustment:

0.0-1.5 Inch Lowered

Rear Coil Springs Included:

Yes

Spring Rate:

110 lbs.

$2,229.95

/kit

$2,470.42

Tuff Stuff |

#7452071123

Tuff Stuff 2071123 Master Cylinder Rebuild Kit, 1-1/8 Inch Bore

GTIN Code:

698252014205

$28.99

/each

-7%

Wilwood |

#835150407520KB

Wilwood 150-40-7520K-B High-Temperature Racing Pads

$352.20

/set

$380.37

-7%

Earls |

#42502042ERL

Earls 02042ERL Hardline Adapter, 1/8 Inch NPT Male to 7/16-24 IFF

(1)

Fitting End A:

1/8" NPT Male

Fitting End B:

7/16"-24 I.F. Female

Angle:

Straight

$11.91

/each

$12.88

Mustang II IFS, Tube Arms, 375 Rated Coilovers, Manual Rack,4-3/4

Speedway Motors |

#9109688

Mustang II IFS, Tube Arms, 375 Rated Coilovers, Manual Rack,4-3/4

Front Suspension Type:

IFS

Suspension Height Adjustment:

Lowered

Control Arm Style:

Tubular

$2,286.99

/kit

Mustang II IFS, Drop Spindles, 700 Coilovers, Power Rack, 4-1/2

Speedway Motors |

#9109719

Mustang II IFS, Drop Spindles, 700 Coilovers, Power Rack, 4-1/2

Front Suspension Type:

IFS

Suspension Height Adjustment:

Lowered

Control Arm Style:

Tubular

$2,326.99

/kit

Wilwood |

#8352506309

Wilwood 250-6309 ReplacementBrake Caliper Mounting Brackets

Material Type:

Billet Aluminum

Finish:

Anodized

$93.22

/each

Showing 1 - 576 of 1,703 results

Shop Feedback:

Did you find what you are looking for?

1966 Studebaker Commander Brakes

Subcategory

Part

Brand

Transmission Family

Rear Axle Family

Availability

Discounts

Price

Customer Rating

Products

Earls AT981504ERL -4 AN Male Straight Union, Anodized Aluminum

90 Degree 1/8 Inch NPT to 7/16-24 IFF Adapter Fitting

Tuff Stuff 2026NA Dual Reservoir Dual Ported Master Cylinder 1 In

QA1 ALN12130K Pro-Rear System Ride Sensitive, 130Lb

Wilwood 220-10685 10 Inch Universal Flexline Rear Brake Line Kit, PB

Related Articles

Mustang II IFS, Drop Spindles, 700 Coilovers, Manual Rack, 4-1/2

QA1 DM501-12130 Pro-Rear System MOD Series, 130Lb, 3 Inch

Tuff Stuff 2028NA Dual Reservoir Master Cylinder, 1-1/8 In Bore

Wilwood 120-11870-P D154 Single Piston Floater Caliper, Polished

Wilwood 260-15541-BK Compact Tandem Master Cylinder w/ Pushrod

Wilwood 340-15677 Forward Swing Forged Pedal Assembly

Wilwood 260-14960-BK Compact Tandem Master Cylinder

Mustang II IFS, Drop Spindles, 500 Coilovers, Power Rack, 4-1/2

Mustang II IFS, Drop Spindles, 375 Coilovers, Manual Rack, 4-3/4

Lokar 70-BHR Billet Hand Brake Boot Ring

Speedway Disc Brake Residual and Proportioning Valves, 2 PSI

QA1 DM501-1501 Pro-Rear System MOD Series, 150Lb, 3 Inch

Wilwood Remote Tandem M/C Kit W/ Bracket And Angled Valve, 1 Bore

Tuff Stuff 2026NC Dual Reservoir Dual Ported Master Cylinder 1 In

Brake Line Pressure Port Switch with Bullet Receptacles, 1/8 NPT

Aluminum Flare Union Adapter Fitting, Blue, -6 AN

Wilwood 150-11363K 4812 BP-10 Brake Pad Set, .49 Inch Thick

Wilwood 140-12099-BK D154 Front Brake Caliper Kit, Black Anodized

Power/Manual Master Cylinder, 1-1/8 Inch Bore w/Bleed Kit

Wilwood 160-7099-BK SRP-BLK 30 Vane Iron Rotor, 11 Inch, R/H

QA1 DM501-1301 Pro-Rear System MOD Series, 130Lb, 3 Inch

Wilwood 553-16239 Replacement Girling Cap, Remote Master Cylinder

Brake Line Tubing Cutter and Flaring Tool Kit

QA1 ALN12110K-1 Pro-Rear System Ride Sensitive, 110Lb

QA1 DM501-1101 Pro-Rear System MOD Series, 110Lb, 3.25 Inch

Tuff Stuff 2071123 Master Cylinder Rebuild Kit, 1-1/8 Inch Bore

Wilwood 150-40-7520K-B High-Temperature Racing Pads

Earls 02042ERL Hardline Adapter, 1/8 Inch NPT Male to 7/16-24 IFF

Mustang II IFS, Tube Arms, 375 Rated Coilovers, Manual Rack,4-3/4

Mustang II IFS, Drop Spindles, 700 Coilovers, Power Rack, 4-1/2

Wilwood 250-6309 ReplacementBrake Caliper Mounting Brackets