Tri-Five Rack and Pinion Assemblies

In this Tech Tip, John explains the design behind a set of headers destined for a Tri-5 using a traditional rack and pinion style steering system.

Learn about rack and pinion steering and the benefits to this specific system. This type of steering design uses a set of gears to convert rotational motion into linear motion. Find out more on the differences between manual vs. powered styles.

How and when to service the rack and pinion in your micro sprint. Find out what can happen to your steering if you do not maintain the steering components.

Learn how to measure pinion depth with a ring and pinion setup tool. Follow as our tech Zach rebuilds a rear differential with the help of a pinion depth tool.

Read about the wheel and tire combination that was chosen for a 1931 Model A Coupe. Learn tips for choosing wheels and tires and how to complete the installation.

After receiving many inquires, Jess shares the wheel and tire combo on her coupe.

In this video, Frank shows how to mount and remove tires from non-beadlock wheels without a tire machine.

Should you mix bias-ply and radial tires? Get all the information you need with our guide on radial tires and bias ply tires, and why mixing is risky.

We’re putting Weld Racing Wheels and tires on our 410 Sprint Car and finally dropping it on the ground. Check it out!

Learn how to assemble our Model A pedal car. Jess Gasper leads you through the process and shares her experience as well as tips and tricks.