$297 Off

UniSteer 8010400-01 1955-57 Chevy Power Rack & Pinion

$297 Off

#91032246

UniSteer 8010400-01 1955-57 Chevy Power Rack & Pinion

Name: UniSteer 8010400-01 1955-57 Chevy Power Rack & Pinion
Brand: UniSteer
SKU: 91032246
Price: 993.99 USD
Availability: OutOfStock
Rating: 4 (2 reviews)

2 Reviews

10 Questions

Can be used with most GM steering pumps
Specifically designed for the 1955-57 Chevy cars
Center to center measures 49" and is has 5" of travel

$993.99

/each

On Backorder

$1,291.00

Save $297.01

This part is Backordered. We currently do not have an estimate when this item will ship.

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Power Rack Type, 49.00" Center to Center, 5.00" Travel

Can be used with most GM steering pumps
Specifically designed for the 1955-57 Chevy cars
Center to center measures 49" and is has 5" of travel
Designed to bolt in using the original mounting holes
Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines

See more details

Key Specs

MFG. Part #	8010600
Brand	UniSteer
Rack Type	Power
Finish	Powder Coated
Material Type	Steel

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Installation Details

Rack and Pinion Assemblies Installation Instructions (91032246)

Installation Tips

Our headers 930-C5 and 930-C5H will work with a Small Block and this rack and pinion steering. Our tight-fit headers and manifolds WILL NOT work.
If using this rack & pinion kit with a big block (396-502 c.i.), you will need to use a C-notched oil pan, and special headers will be needed from TRI-5 R&D.
Although this kit is fairly simple to install, some modifications are necessary.
Before starting installation, please be aware of the modifications that are needed to install.
Please be aware of the specific applications that this kit is intended to fit as outlined above.
Due to application variables, this kit may not fit all applications and therefore it is recommended to verify that the kit will fit your vehicle combination prior to altering vehicle.

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

UniSteer 8010600 Details

Finally a bolt-on power rack and pinion for 1955-57 Chevy cars. Simply remove the original steering box, idler arm and tie rod assembly and bolt this unit back in using the original mounting holes. Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines. Can be used with most GM steering pumps.

This item must be used with OEM style spindles. It WILL NOT work with dropped spindles.
Designed for use with S/B Chevy 265-400 c.i. V-8 with side engine mounts only.
Must use chassis headers and a stock type pan sump for clearance.
Steering U-joint 910-32255 is required (17mm).

Charts

910-32246 Instructions (PDF)

Guides & Documents

Rack and Pinion Assemblies Installation Instructions (91032246)

UniSteer 8010600 Specifications

KEY SPECS
MFG. Part #	8010600
Brand	UniSteer
Rack Type	Power
Finish	Powder Coated
Material Type	Steel

GENERAL
Center to Center	49.00"
Turns Lock to Lock	2.65
Travel	5.00"
Thread Pitch	M14x1.5
Sold in Quantity	Each
Notes	Uses 16mm-DD for the coupler.

Ratings & Reviews

2 Reviews

Overall Assessment

Customers highlighted the robust manufacture and quality materials of the product. However, some indicated it may not be suitable for all LS engines, being better designed for stock engines. The mounting bracket was noted to fit tightly at the top, with some dissatisfaction regarding it being too narrow at the bottom. An improvement suggested by users would be a 1" DD shaft for compatibility with most steering columns. Nevertheless, customers would recommend the product to others, suggesting its advantages outperform minor design shortcomings.

Write A Review

2 reviews

Filter by Ratings

Sort Reviews

Won't fit ls engines

4.0

4 years ago

Joe

Las Vegas NV

It's great build and solid materials It won't fit ls engines don't matter Wich oil pan do you use It just won't fit It's designed for stock engines only

Would Recommend

I would recommend to other customer

4.0

5 years ago

1955

Nampa, Id.

Verified

Mounting bracket at frame is approx. 1/8" too narrow on bottom of both sides. Top fits tight. I would of liked to see a 1" DD shaft as most steering columns are 1".

Would Recommend

Showing 2 of 2 reviews

Questions & Answers

10 Questions • 10 Answers

Sort Questions

1955 handyman with a small block 350 with side mounts and corvette style exhaust manifolds with center output. will this kit work with those manifolds? stock spindles converted to disk brakes

by snowsledder

• 4 years ago

1 answer

View Answer

I have the dropped spindles that I purchased here at Speedway Motors. Is this rack and pinion set up compatible with them? 1955 Chevy BelAir with side mounts 3/4" forward. Small block V8

by Windy

• 7 years ago

1 answer

View Answer

Will this power rack fit a 55 chevy with BBC with 3/4 forward side mounts that use the rivet holes on the cross member to bolt to? Proformance Online sells them, they are high quality made parts. I'm not worried to much about the headers i can fab me up a set if i have to. Thanks

by pops68

• 8 years ago

1 answer

View Answer

Is this compatible with LS swaps in Tri-5 cars!? The previous cryptic answer to an LS compatibility question cites part # 91032246 but when searched it comes right back to Unisteer 8010400-01, not really helpful with $800 part that may or may not be right... Is this a matter of where the lines go into the pinion on the rack? Is there another rack for this applicaiton?

by abh3

• 9 years ago

1 answer

View Answer

I have speedway headers p/n 9308037H Will this kit work using this header?

by Dave

• 10 years ago

1 answer

View Answer

I have front and rear motor mounts. Is this a problem? It says works with side mounts only. I've got a 283 and power glide trans. It was put in years ago. Reviving it pretty much as is. It will be our shop daily driver. Two door handyman 150

by None...just Mark

• 10 years ago

1 answer

View Answer

Instructions state that it will not work with dropped spindles. I have 2-inch dropped spindles, but the spindles are modular, with the original steering arm knuckles arms bolted to the spindle. What clearance problems would I have with this kit?

by dave

• 11 years ago

1 answer

View Answer

Will an Ls3 fit with rack and pinion

by danny

• 15 years ago

1 answer

View Answer

does it come right hand drive thanks ..if not can you surply every thing but the rack and pinion.

by glen

• 15 years ago

1 answer

View Answer

What is the GM part # of the oil pan and manifol needed for a small block chevy to install this kit on a 57 chevy belair ?

by clyde

• 15 years ago

1 answer

View Answer

10 of 10 questions shown

Fitment

1955-1957 Chevy Bel Air

1957 Chevy Del Ray

1955-1957 Chevy Nomad

1955-1957 Chevy One-Fifty Series

1955-1957 Chevy Two-Ten Series