1956 Dodge Power Wagon Parts

26,817 products fit your

1956 Dodge Power Wagon

Add Engine

Show Direct Fit Parts

26,817 products

Sort By:

Clear All

Fitment

1956 Dodge Power Wagon

Products

-13%

Aluminum Flare Bulkhead Fitting, 45 Degree, -4 AN

Speedway Motors |

#324983704

Aluminum Flare Bulkhead Fitting, 45 Degree, -4 AN

AN Size:

-4 AN

Angle:

45 degree

Fitting End A:

-4 AN Male

$9.49

/each

$10.95

Industrial Tap, 7/16 Inch-20 SAE, Right Hand Thread

Speedway Motors |

#91281033

Industrial Tap, 7/16 Inch-20 SAE, Right Hand Thread

(1)

Thread Pitch:

7/16"-20

Thread Type:

RH Thread

$11.99

/each

-76%

Swedged Aluminum Throttle Linkage Tubes, 3/16 Inch (10-32) Thread

Speedway Motors |

#94055301

Swedged Aluminum Throttle Linkage Tubes, 3/16 Inch (10-32) Thread

(35)

Thread Pitch:

3/16" (10-32) RH/LH

Material Type:

Aluminum

Sold in Quantity:

Each

$2.67

/each

$11.49

Weld Racing |

#81593515348

Weld Racing 93-515348 Rodlite Wheel, 15 X 15, 4-1/2 Inch Backspace

(2)

Wheel Diameter:

15 Inch

Width:

15"

Wheel Bolt Pattern (in.):

5x4.5 in. | 5x4.75 in.

$715.00

/each

Weld Racing |

#8159356346

Weld Racing 93-56346 Rodlite Wheel, 15 X 6, 3-1/2 Inch Backspace

Wheel Diameter:

15 Inch

Width:

Wheel Bolt Pattern (in.):

5x4.5 in. | 5x4.75 in.

$415.00

/each

Dick Landy's 64 Dodge

Drag racing changed a lot in the 60's, and Dick Landy was right in the middle of it all. This 64 Dodge was the first factory built 426 Hemi car to win a sanctioned drag race. How cool is that?

Proper Power Steering for a 1955 Chevy BelAir

In this Tech Tip, a customer asked about the correct parts needed to set up the power steering system on his 1955 BelAir.

Employee Rides: 1956 Chevy Nomad - Kurt Bonner

Kurt sees himself as the caretaker of this Nomad. Built by a family friend years ago, Kurt honors his memory by keeping his Nomad out on the road where it belongs.

Greg's '56 Chevy

Not only is Greg Turner's '56 a great driver, it's full of great family memories. Built in the home garage by Greg and his sons, this clean Chevy has covered a lot of miles.

This 1957 Ford Fairlane Pro-Touring Monster with 500+ N/A HP

Meet the 1957 Ford Fairlane with modern suspension, 560HP, and daily drivability—ripping autocross courses and cruising NC streets.

Employee Rides: 1957 Four-Door Hardtop - Steve Wickizer

Originally purchased as a parts car Steve's '57 four-door hardtop is a true survivor that's been in the family for over 50 years.

Marc's '56 Chevy Pickup

Check out Marc and Kelly's LS-powered '56 Chevy Homebuilt Heaven award-winning hauler!

1957 Corvette Factory Race Car Survivor

This is the amazing story of a 1957 Corvette that was built by GM as a factory-backed race car and test mule for the experimental Rochester Ramjet fuel injection. It won its class at Nassau and Daytona, then disappeared into a Chicago garage for 47 years.

Keeping your 1955 Chevy Cool

Shortcuts don't always pay off. Zach Raddatz walk us through his experience with a cheap radiator so we don't make the same mistake!

1946 Ford Sedan Delivery Engine Detail

Speedway Motors Product Manager Jeff K. talks about how to really make your engine bay stand out from the crowd with just a little patience, and some Speedway products.

Storage -16 AN Flare Fitting Cap, Pack of 4

Speedway Motors |

#54523811

Storage -16 AN Flare Fitting Cap, Pack of 4

Sold in Quantity:

Set

AN Size:

-16 AN

$6.49

/set

HDPE Sealing Washers for Bulkhead Fittings

Speedway Motors |

#6171097

HDPE Sealing Washers for Bulkhead Fittings

(4)

Gasket Material:

High Density Polyethylene

Sold in Quantity:

Pair

$3.49

/pair

Speedway Motors |

#6176037

Flare Union Adapter Fittings, -10 AN

Fitting End A:

-10 AN Male

Fitting End B:

-10 AN Male

Angle:

Straight

$10.99

/each

Speedway Motors |

#6176130

Aluminum Tee Bulkhead Fitting, -3 AN

(1)

AN Size:

-3 AN

Angle:

Tee

Fitting End A:

-3 AN Male

$19.99

/each

Straight Aluminum Bulkhead Flare Fitting, Blue, -10 AN

Speedway Motors |

#6176120

Straight Aluminum Bulkhead Flare Fitting, Blue, -10 AN

AN Size:

-10 AN

Angle:

Straight

Fitting End A:

-10 AN Male

$12.99

/each

Steel 45 Degree -4 AN to 1/8 NPT Male Adapter Fitting

Speedway Motors |

#324962304

Steel 45 Degree -4 AN to 1/8 NPT Male Adapter Fitting

(3)

Fitting End A:

-4 AN Male

Fitting End B:

1/8" NPT Male

Angle:

45 degree

$6.49

/each

-91%

Aeroquip |

#617404

Aeroquip FBU0400 Startlite Hose/Inch -4AN

Hose Size:

-4 AN

Material Type:

Rubber

Hose Length:

$2.65

$31.84

-91%

Aeroquip |

#617410

Aeroquip FBU1000 Startlite Hose/Inch -10AN

(1)

Hose Size:

-10 AN

Material Type:

Rubber

Hose Length:

$3.87

$46.42

Aeroquip |

#617416

Aeroquip FBU1600 Startlite Hose/Inch -16AN

Hose Size:

-16 AN

Material Type:

Rubber

Hose Length:

$2.99

$115 Off

Ididit |

#4461330C

Ididit 1130300020 Tilt Wheel Steering Column w/ Shift, 30 Inch, Chrome

(1)

Mount Type:

Universal

Column Type:

Tilt

Shifter Location:

Column

$1,144.00

/each

$1,259.00

-9%

Ididit |

#4461228C

Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome

(7)

Mount Type:

Universal

Column Type:

Tilt

Shifter Location:

Floor

$758.00

/each

$834.00

-71%

Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree

Aeroquip |

#1061440

Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree

(2)

Fitting Hose Size:

-8 AN

Fitting End A:

-8 AN Female

Fitting End B:

-8 AN Hose

$18.99

/each

$67.82

-70%

Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree

Aeroquip |

#1061241

Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree

(3)

Fitting Hose Size:

-4 AN

Fitting End A:

-4 AN Female

Fitting End B:

-4 AN Hose

$16.99

/each

$57.40

-9%

Ididit |

#4461232C

Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome

(3)

Mount Type:

Universal

Column Type:

Tilt

Shifter Location:

Floor

$758.00

/each

$834.00

Straight High-Flow O-Ring -8 AN Hose to -8 AN Port Fitting

Speedway Motors |

#6177013

Straight High-Flow O-Ring -8 AN Hose to -8 AN Port Fitting

(1)

Fitting End A:

-8 AN Male

Fitting End B:

-8 AN Male o-ring

Angle:

Straight

$13.99

/each

Beams Seatbelts |

#91072060

Push Button Lap Seat Belt

(61)

Overall Width:

1.81"

Overall Length:

74.00"

Harness/Belt Buckle Type:

Button

$24.99

/each

-8%

Ididit |

#4463334

Ididit 2303370040 3.5 In. Steering Tilt Column Drop Mount 2.25 In Hole

Hole Diameter:

2.25"

Drop:

3.50"

Material Type:

Aluminum

$119.00

/each

$130.00

-9%

Patriot Exhaust |

#91013331

Patriot Exhaust Short Steel Megaphones, 2 x 4 x 12 Inch

(4)

Overall Length:

12.00"

Exhaust Tubing Diameter:

2 Inch

Sold in Quantity:

Each

$51.03

/each

$56.13

Replacement Gauges for DECO Hydraulic Coil Spring Raters

Speedway Motors |

#910659

Replacement Gauges for DECO Hydraulic Coil Spring Raters

(3)

Sold in Quantity:

Each

$64.99

/each

-69%

Aeroquip |

#6173250

Aeroquip FCC0306 -3 AN TFE Braided High Pressure Hose-1/8 Inch ID-6 Ft

Hose Size:

-3 AN

Material Type:

Teflon

Hose Length:

6 ft.

$27.99

/each

$90.89

-76%

6061 Aluminum Tie Rod Tube - 5/8 Inch Thread

Speedway Motors |

#910355

6061 Aluminum Tie Rod Tube - 5/8 Inch Thread

(26)

Tube O.D.:

1.125"

Thread Pitch:

5/8"-18 RH/LH

Material Type:

Aluminum

$6.03

/each

$25.99

Shotgun Bill's Scoop® Aluminum Air Intake Scoop, Polished

Speedway Motors |

#92511907

Shotgun Bill's Scoop® Aluminum Air Intake Scoop, Polished

(8)

Overall Length:

19.50

Overall Width:

12"

Overall Height:

5.405"

$361.99

/each

Speedway Motors |

#91281034

Industrial Tap, 1/2 Inch-20 SAE

(2)

Thread Pitch:

1/2"-20

Drill Bit Included:

Material Type:

Steel

$19.49

/each

Stainless Steel 2 Inch Bullet Glasspack Mufflers, 18" Case

Speedway Motors |

#91013113

Stainless Steel 2 Inch Bullet Glasspack Mufflers, 18" Case

(5)

Muffler Type:

Glass Pack

Inlet Diameter:

Outlet Diameter:

$157.99

/each

Longacre |

#47545243

Longacre® 52-45243 Caliper Fitting - 1/8 NPT x -3 AN Straight

Fitting End A:

-3 AN Male

Fitting End B:

1/8" NPT Male

Angle:

Straight

$9.19

/each

Titan Tools |

#72845207

Titan Tools 45207 Hose Clamp Assortment, 20 Piece

(3)

Style:

Worm Gear

Material Type:

Steel

Color:

Natural

$15.99

/box

Offenhauser |

#5606230

Offenhauser 6230 Universal Cable Linkage

Color:

Black

Sold in Quantity:

Each

$248.99

/set

Speedway Motors |

#1351484

Lynx Styled Air Cleaner

(6)

Shape:

Triangular

Material Type:

Steel

$26.99

/each

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Speedway Motors |

#61761811

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Angle:

Straight

Fitting End A:

-8 AN Male

Fitting End B:

-12 AN Male

$15.99

/each

Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

Speedway Motors |

#61760791

Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

(4)

Fitting End A:

-3 AN Male

Fitting End B:

1/8" NPT Male

Angle:

90 degree

$18.49

/each

Speedway Motors |

#91064102

Voltage Reducer for Fans & Motors

(1)

Terminal Type:

Spade

Sold in Quantity:

Each

$15.49

/each

Showing 1 - 216 of 26,817 results

Shop Feedback:

Did you find what you are looking for?

1956 Dodge Power Wagon Parts

Category

Part

Brand

Transmission Family

Rear Axle Family

Availability

Engine Family

Discounts

Price

Customer Rating

Products

Aluminum Flare Bulkhead Fitting, 45 Degree, -4 AN

Industrial Tap, 7/16 Inch-20 SAE, Right Hand Thread

Swedged Aluminum Throttle Linkage Tubes, 3/16 Inch (10-32) Thread

Weld Racing 93-515348 Rodlite Wheel, 15 X 15, 4-1/2 Inch Backspace

Weld Racing 93-56346 Rodlite Wheel, 15 X 6, 3-1/2 Inch Backspace

Related Articles

Storage -16 AN Flare Fitting Cap, Pack of 4

HDPE Sealing Washers for Bulkhead Fittings

Flare Union Adapter Fittings, -10 AN

Aluminum Tee Bulkhead Fitting, -3 AN

Straight Aluminum Bulkhead Flare Fitting, Blue, -10 AN

Steel 45 Degree -4 AN to 1/8 NPT Male Adapter Fitting

Aeroquip FBU0400 Startlite Hose/Inch -4AN

Aeroquip FBU1000 Startlite Hose/Inch -10AN

Aeroquip FBU1600 Startlite Hose/Inch -16AN

Ididit 1130300020 Tilt Wheel Steering Column w/ Shift, 30 Inch, Chrome

Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome

Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree

Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree

Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome

Straight High-Flow O-Ring -8 AN Hose to -8 AN Port Fitting

Push Button Lap Seat Belt

Ididit 2303370040 3.5 In. Steering Tilt Column Drop Mount 2.25 In Hole

Patriot Exhaust Short Steel Megaphones, 2 x 4 x 12 Inch

Replacement Gauges for DECO Hydraulic Coil Spring Raters

Aeroquip FCC0306 -3 AN TFE Braided High Pressure Hose-1/8 Inch ID-6 Ft

6061 Aluminum Tie Rod Tube - 5/8 Inch Thread

Shotgun Bill's Scoop® Aluminum Air Intake Scoop, Polished

Industrial Tap, 1/2 Inch-20 SAE

Stainless Steel 2 Inch Bullet Glasspack Mufflers, 18" Case

Longacre® 52-45243 Caliper Fitting - 1/8 NPT x -3 AN Straight

Titan Tools 45207 Hose Clamp Assortment, 20 Piece

Offenhauser 6230 Universal Cable Linkage

Lynx Styled Air Cleaner

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

Voltage Reducer for Fans & Motors