|
#91064102
$15.49
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 2.00" Overall Length, 1.34" Diameter
Need help?
855.313.9176Quick and Easy Returns
Return PolicyYou can use this voltage reducer to operate 6 volt DC motors and fans on 12 volt DC. Ceramic insulator with embedded coil and screw-type terminals. 1.5 ohm resistance, 4 amp max load, 25 watts. Mounting stem has 7/16"-28 threads.
Not to be used with gauges, radios or other electronic items. We recommend part 910-64101 for gauges.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91064102 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Length | 2.00" |
| Diameter | 1.34" |
| Amperage | 4 amps |
| Wattage | 25 watts |
| Resistance | 1.5 ohms |
| Terminal Type | Spade |
| Sold in Quantity | Each |
5
1 Review
5
1 reviews
5
1
4
0
3
0
2
0
1
0
Filter by Ratings
Works well for my application.
5.0
6 years ago
Woody
Painesville oh
Verified
I used it 4 a a motor driven ooga horn as it is rated 4 motor start up. Works well.
Would Recommend
Showing 1 of 1 reviews
7 Questions • 7 Answers
I am using this voltage reducer to run my 6 volt heater fan from a 12 volt system. It seems to get really hot . So hot you cannot touch it without getting burned . I know theses heat up but is it getting to hot ?
by Carl
• 8 years ago
1 answer
View Answer
Which type of voltage reducer would I use to power the original 6 volt clock in my 1936 on a 12volt system.
by Liberty5601
• 9 years ago
1 answer
View Answer
I am trying to connect a Model A "Aruga" horn to a 12 volt system. Will this work for that. The horn has a 6 volt motor to turn the cam that makes the noise. thanks,,,
by retired, having fun
• 10 years ago
1 answer
View Answer
with this work on a blige pump for a boat?
by Allen
• 10 years ago
1 answer
View Answer
Will one of these operate both the wiper motor and the fan motor?
by Turk
• 11 years ago
1 answer
View Answer
does the metal with the nut need to g to aplate for heat will the metal end to be grounded
by cbarn
• 12 years ago
1 answer
View Answer
which terminal do you wire the 12v input to, The center one or the side one?
by
• 15 years ago
1 answer
View Answer
7 of 7 questions shown
