Studebaker Street Hose Installation Tools

AN fittings are a simple and effective way to plumb fluid systems in your car. This AN fittings install guide answers some of the more common questions pertaining to AN fittings and AN line.

Learn how to use Koul Tools for your AN Hose Assembly with our video guide. Koul Tools make it easy to install a braided rubber hose into the AN fitting socket.

One of the most challenging things about swapping transmissions can be figuring out the clutch linkage. Speedway can show you how to install the upgraded hydraulic throwout bearing with ease.

Choosing the right suspension products when building your street rod or custom car. A step by step on how to determine which parts are needed for installation, how to calculate the spring rate and other helpful tips along the way.

Learn how to install spark plug wire terminal ends. Our step by step guide takes you through terminal end and boot installation with the use of a wire crimping tool.

Learn what throttle and kickdown cables do, how to install them, and tips for troubleshooting issues like broken or stuck cables.

Learn how to measure pinion depth with a ring and pinion setup tool. Follow as our tech Zach rebuilds a rear differential with the help of a pinion depth tool.

Follow this how-to as Kevin explains the process of removing the hood on his '54 Chevy Bel Air using a handmade Hood Spring tool.

Plumbing a fluid system can sometimes be frustrating. In this article, Steve walks you through a brake line installation with pro tips to get the job done right.

Many sanctioning bodies now require mud covers to be bolted to the wheel and the mounting tabs to be integral or welded to the wheel. This article explains how to properly bolt on mud covers and the tools required to do so.