MagnaFlow Hangers, Mounts, and Hardware

How to make a plaque mount bracket and mount an aluminum novelty plaque on a '46 Ford Sedan.

Many sanctioning bodies now require mud covers to be bolted to the wheel and the mounting tabs to be integral or welded to the wheel. This article explains how to properly bolt on mud covers and the tools required to do so.

Custom rides usually require custom brake and fuel lines. Educate yourself on the tools you will need and the proper steps to a successful line assembly in our buyer's guide.

Kevin W. walks through each step of installing a new alternator bracket on a 454 Big Block Chevy.

Follow this guide on installing a Speedway Motors Billet LS Alternator Bracket. If you’re looking for a simple solution that looks good while solving positioning issues from factory brackets, then these brackets are for you.

Follow this step by step guide on how to install adjustable LS motor mounts to set your engine location exactly where you want it.

Jordan shows us how to use ICT Billet motor mount adapters to bolt a 6.0 LS into his 3rd-Gen Firebird.

These are the specifications for the alternator and A/C brackets from Bill's Hot Rod Company available at Speedway Motors.

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.

Learn how to make your own engine mounts. Follow Employee Tim as he builds custom motor mounts for putting a Red Ram 241 Hemi in his 29' Roadster.