Hammers

Learn about classic car bodywork from an expert. We go over tips for Dents, Guide Coats, Sanding, and more for your hot rod or other classic body restoration project.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

Learn about torque specs for your racing wheels. The experts cover what you should have your lug nuts and beadlocks torqued to, so you can avoid warping.

Read how to install rear drop spring to lower a 1969 C10 pickup. Follow these steps for a smooth installation.

Follow along as Speedway Tech Kevin W. updates the brakes on his Bel Air with a modern disc brake conversion kit.

With the coil-overs attached, it is now time to make the Chevelle rear whole again. Follow along as Jeff installs a 9" third member and spline axles with a few tips on axle lengths and bolt patterns.

How to lower a C10 Chevy truck with lowering coil springs and install a front end rebuild kit. Upgrade your broken, rusty, or saggy suspension with our guide.

Doug Siemen's Model T is a cool little hot rod. It's even better when you learn that it was built from scratch for a great cause. Check it out!

Installing the rear end onto the frame was easier in theory than application.

If you're struggling to find the perfect gift for the hot rod or classic car builder in your life, here's a helpful guide with some great gift ideas from Speedway Motors!