Dodge Lancer Carburetor Adapter Plates

Determining the correct flexplate for your V8 Mopar-powered project takes a little understanding of how these engines were balanced. Our Mopar flexplate buyer’s guide will help.

Learn about Dual Carb Linkage Setup. Follow along as an expert works through his fuel and throttle setup including part mounting and some modifications.

Follow along as our expert goes through his process for replacing the steel wire covers on his 1954 Dodge 241 with a set of Offenhauser Finned Wire Covers.

Learn about performing an LS Swap in a 1972 Chevelle in this tech article. We'll discuss lessons learned from our Chevelle engine swap using a 500-horse 6.0.

This handy adapter is an inexpensive way to adapt an LS into your classic, muscle car, or truck. It takes care of the steam line as well as the hose diameter difference, allowing you to run a standard radiator with your LS swap.

The LS swap is no doubt still going strong, but if you’re planning to run an automatic behind your 4.8, 5.3, or 6.0L LS-powered ride, you’ll need to pay attention to a few items we discuss in this buyer’s guide.

Learn how to convert an engine using a Carbureted LS Conversion Kit, along with tips for a smooth install. Read more on the manifold and timing control module, which comes with an MSD ignition control box and wiring harness.

An LS cam swap can yield big power gains. And, you can do it at home. Here's how...

A guide to choosing the right camshaft for your engine. See how to install a new LSR roller camshaft while upgrading valve springs and rocker trunnions.

An overview on swapping turbo mufflers for chamber mufflers on a 1969 C/10 pickup. See how to extend the muffler length using exhaust pipe.