1952 Studebaker 2R10 Engine Parts

5,445 products fit your

1952 Studebaker 2R10

Add Engine

Show Direct Fit Parts

5,445 products

Sort By:

Clear All

Fitment

1952 Studebaker 2R10

Products

Speedway Motors |

#9102179

Tri-Bar Wing Nut, Chrome

(3)

Thread Pitch:

1/4"-20

$8.49

/each

Speedway Motors |

#91019981

Speedway Motors LS Swap V Band Cast Iron Exhaust Manifold LH

(4)

Material Type:

Cast Iron

Hardware Included:

Yes

as low as

$170.99

/each

Speedway Motors |

#91011692

Stromberg 97 Secondary Base Assembly

(5)

Material Type:

Aluminum

Sold in Quantity:

Each

$87.99

/each

Speedway Finned Aluminum HEI Distributor Cover

Speedway Motors |

#91003034

Speedway Finned Aluminum HEI Distributor Cover

(2)

Outside Diameter:

5.513"

Material Type:

Aluminum

$45.99

/each

LS Swap Exhaust Manifolds w/ V-Band for LS1, 5.3, 6.0, 4.8, LS3

Speedway Motors |

#91009944

LS Swap Exhaust Manifolds w/ V-Band for LS1, 5.3, 6.0, 4.8, LS3

(1)

Material Type:

Cast Iron

Hardware Included:

Yes

as low as

$329.99

/pair

Steve's 1952 Chevy Truck

Steve Silva's '52 3100 is an eye catching truck, and it's also hiding a few surprises that were integrated by one very clever and talented builder.

1967-1972 Chevy C10 Pickup Lowering Guide

From a mild leveling to slammed and “in the weeds” there are several options to lowering a C10. We discuss the options in our ’67-’72 C10 lowering guide.

Progress Update | 1968 C10 Build

We've come a long way on our '68 C10 project, but we still have a long way to go. Watch as Kevin and Joe discuss where we're at and where we're going.

Truck Arm Suspension Design: 67-72 C10 Suspension Upgrades

In this Tech Talk episode, we detail the install of a C10 G-Comp Rear Suspension kit. This kit uses truck arms like the original, but adds coilovers and plenty of adjustment options.

Front Suspension and Rolling Chassis | 1968 C10 Build Episode 3

In Episode 3 of our C10 build, we install a front suspension kit and finally have a rolling chassis!

Teardown and G-Comp Rear Suspension Install | 1968 C10 Build Episode 2

In Episode 2 of our '68 C10 build, we rip it apart, clean up 54 years of rust and dirt, and get to work on the rear suspension.

C10 Rear Drop Springs Installation

Read how to install rear drop spring to lower a 1969 C10 pickup. Follow these steps for a smooth installation.

Updating the brakes on a '51 Deluxe

In this Tech Tip, John makes a few suggestions for a customer looking to update the braking system on his ’51 Deluxe.

Carburetor Stud Kits, 1-3/8 Inch and 2 Inch

Speedway Motors |

#9100999

Carburetor Stud Kits, 1-3/8 Inch and 2 Inch

(1)

Thread Pitch:

5/16"-18

Material Type:

Steel

Finish:

Zinc Plated

$19.49

/kit

Valvoline |

#795679082

Valvoline 679082 VR1 Synthetic Motor Oil, 20W50, 6 Quart

(11)

Oil Weight:

20W50

Oil Type:

Synthetic

ZDDP Enhanced:

Yes

$77.99

/box

Valvoline |

#795773780

Valvoline 773780 Premium Blue Diesel Engine Oil, 15W40, 3x1 Gal

(7)

Oil Weight:

15W40

Oil Type:

Conventional

ZDDP Enhanced:

$86.99

/box

Valvoline |

#7958223881

Valvoline 822388 VR1 10W30 Conventional Motor Oil, 1 Quart

(2)

Oil Weight:

10W30

Oil Type:

Conventional

ZDDP Enhanced:

$9.99

/quart

Speedway Motors |

#91003780

Valve Cover Studs, Set of 8

(27)

Overall Length:

1.50"

Thread Pitch:

1/4"-20

Material Type:

Steel

$16.99

/set

Speedway Super Seal® Air Cleaner Base Gasket

Speedway Motors |

#91011101

Speedway Super Seal® Air Cleaner Base Gasket

(67)

Sold in Quantity:

Each

Inlet Diameter (Fraction):

5-1/8"

$13.49

/each

3/8 NPT Male to 5/16 Inch Hose Barb Adapters

Speedway Motors |

#91011774

3/8 NPT Male to 5/16 Inch Hose Barb Adapters

(9)

Fitting End A:

5/16" Hose barb

Fitting End B:

3/8" NPT Male

Angle:

Straight

$11.99

/pair

AN Flare Plug Fitting Economy Pack, 20-Piece

Speedway Motors |

#91009401

AN Flare Plug Fitting Economy Pack, 20-Piece

(1)

Fitting End A:

-4 AN to -12AN

Fitting Attachment 1:

Male AN

Material Type:

Aluminum

$28.99

/kit

Speedway Motors |

#9102764

Twin Turbo Dual Feed Oil Line Kit

Sold in Quantity:

Kit

$76.99

/kit

LS Swap 31 Inch Double Pass Radiator w/Electric Fan/Oil Pan Kit

Speedway Motors |

#9100255

LS Swap 31 Inch Double Pass Radiator w/Electric Fan/Oil Pan Kit

Sold in Quantity:

Kit

Radiator Style:

Double Pass

$879.99

/kit

GM 10SI 1 Wire Alternator, 110 Amp w/Bills Hot Rod Bracket,Chrome

Speedway Motors |

#9100791

GM 10SI 1 Wire Alternator, 110 Amp w/Bills Hot Rod Bracket,Chrome

One Wire Alternator:

Yes

Alternator Amperage:

110 amp

Alternator Finish:

Chrome

$330.99

/kit

-43%

Fragola |

#61770161

Fragola 495106-BL O-Ring -10AN Hose to -10AN Port Fitting

(2)

Fitting End A:

-10 AN Male

Fitting End B:

-10 AN Male O-ring

Angle:

Straight

$15.99

/each

$28.22

Stainless Steel -3 AN Straight Bulkhead Tee Adapter Brake Fitting

Speedway Motors |

#6178513

Stainless Steel -3 AN Straight Bulkhead Tee Adapter Brake Fitting

(5)

AN Size:

-3 AN

Angle:

Tee

Fitting End A:

-3 AN Male

$23.99

/each

Aluminum -8 AN Flare Fitting Cap, Black Anodized

Speedway Motors |

#61761971

Aluminum -8 AN Flare Fitting Cap, Black Anodized

(5)

Material Type:

Aluminum

Sold in Quantity:

Each

$6.49

/each

Russell |

#61766205

Russell 662051 Endura Finish Aluminum Pipe Plug-3/8 In NPT

(3)

Fitting Type:

Plug Fitting

Fitting Size 1:

3/8" Male NPT

Fitting Attachment 1:

Male NPT

$7.95

/pair

Black Straight -4 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

Speedway Motors |

#61760421

Black Straight -4 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

(2)

Fitting End A:

-4 AN Male

Fitting End B:

1/8" NPT Male

Angle:

Straight

$8.99

/each

Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting

Speedway Motors |

#6176044

Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting

(6)

Fitting End A:

-6 AN Male

Fitting End B:

1/4" NPT Male

Angle:

Straight

$9.09

/each

King Chrome GM One Wire Alternator, 65 Amp w/Inboard Bracket

Speedway Motors |

#9100750

King Chrome GM One Wire Alternator, 65 Amp w/Inboard Bracket

One Wire Alternator:

Yes

Alternator Amperage:

65 amp

Alternator Finish:

Chrome plated

$246.99

/kit

King Chrome GM One Wire Alternator, 100 Amp w/Chrome Bracket

Speedway Motors |

#9100754

King Chrome GM One Wire Alternator, 100 Amp w/Chrome Bracket

One Wire Alternator:

Yes

Alternator Amperage:

100 amp

Alternator Finish:

Chrome plated

$199.99

/kit

-7%

Mr Gasket |

#55077C

Mr Gasket 77C Intake Gasket, 6 X 24 Inch

Material Type:

Performance

Material Thickness:

0.0625"

Length:

24"

$21.43

/each

$23.19

FiTech |

#521630001

FiTech 60013-30001 Programmer For 30001, 30002 Handheld Go EFI 4

(1)

Sold in Quantity:

Each

Component Type:

Hand held controller

$167.00

/each

FiTech |

#521630003

FiTech 60013-30003 Programmer For FiTech 30003 Go Street EFI

(1)

Sold in Quantity:

Each

Component Type:

Hand held controller

$167.00

/each

-3 AN Male to 1/8 Inch NPT Male Adapter Fitting

Speedway Motors |

#6176041

-3 AN Male to 1/8 Inch NPT Male Adapter Fitting

(4)

Fitting End A:

-3 AN Male

Fitting End B:

1/8" NPT Male

Angle:

Straight

$7.99

/each

Black Straight -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

Speedway Motors |

#61760411

Black Straight -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

(1)

Fitting End A:

-3 AN Male

Fitting End B:

1/8" NPT Male

Angle:

Straight

$9.99

/each

-45%

45 Degree Flare Adaptor, AN10 to 1/2 Inch NPT

Speedway Motors |

#6176097

45 Degree Flare Adaptor, AN10 to 1/2 Inch NPT

Fitting End A:

-10 AN Male

Fitting End B:

1/2" NPT Male

Angle:

45 degree

$13.49

/each

$24.89

-52%

Fragola |

#61761091

Fragola 482508-BL AN Flare Tee Fitting, -8 AN to 3/8 NPT, Black

(1)

Fitting End A:

-8 AN Male

Fitting End B:

3/8" NPT Male

Fitting End C:

-8 AN Male

$11.99

/each

$25.41

Straight Aluminum Bulkhead Flare Fitting, Black, -3 AN

Speedway Motors |

#61761161

Straight Aluminum Bulkhead Flare Fitting, Black, -3 AN

(2)

AN Size:

-3 AN

Angle:

Straight

Fitting End A:

-3 AN Male

$8.99

/each

Straight Aluminum Bulkhead Flare Fitting, Black, -4 AN

Speedway Motors |

#61761171

Straight Aluminum Bulkhead Flare Fitting, Black, -4 AN

(1)

AN Size:

-4 AN

Angle:

Straight

Fitting End A:

-4 AN Male

$9.49

/each

Aluminum Flare Reducer Adapter, Black, -6 AN to -8 AN

Speedway Motors |

#61761771

Aluminum Flare Reducer Adapter, Black, -6 AN to -8 AN

(1)

Angle:

Straight

Fitting End A:

-6 AN Male

Fitting End B:

-8 AN Male

$13.99

/each

VS Racing |

#60300002

VS Racing Turbo Heat Shielding Blanket, T3/T4/T6, Black/Titanium

(2)

Sold in Quantity:

Each

Material Type:

Lava Rock

$59.95

/each

VS Racing |

#60312286

VS Racing VSR50BOV Blow Off Valve, 50MM, Setup For Low Vac Setups

(4)

Blow-Off Valve Size:

50mm

Adjustable:

Yes

Spring Rates Included:

10-14 in.Hg & 18-22 in.Hg

$74.99

/each

Showing 1 - 1656 of 5,445 results

Shop Feedback:

Did you find what you are looking for?

1952 Studebaker 2R10 Engine Parts

Subcategory

Part

Brand

Transmission Family

Availability

Engine Family

Discounts

Price

Customer Rating

Products

Tri-Bar Wing Nut, Chrome

Speedway Motors LS Swap V Band Cast Iron Exhaust Manifold LH

Stromberg 97 Secondary Base Assembly

Speedway Finned Aluminum HEI Distributor Cover

LS Swap Exhaust Manifolds w/ V-Band for LS1, 5.3, 6.0, 4.8, LS3

Related Articles

Carburetor Stud Kits, 1-3/8 Inch and 2 Inch

Valvoline 679082 VR1 Synthetic Motor Oil, 20W50, 6 Quart

Valvoline 773780 Premium Blue Diesel Engine Oil, 15W40, 3x1 Gal

Valvoline 822388 VR1 10W30 Conventional Motor Oil, 1 Quart

Valve Cover Studs, Set of 8

Speedway Super Seal® Air Cleaner Base Gasket

3/8 NPT Male to 5/16 Inch Hose Barb Adapters

AN Flare Plug Fitting Economy Pack, 20-Piece

Twin Turbo Dual Feed Oil Line Kit

LS Swap 31 Inch Double Pass Radiator w/Electric Fan/Oil Pan Kit

GM 10SI 1 Wire Alternator, 110 Amp w/Bills Hot Rod Bracket,Chrome

Fragola 495106-BL O-Ring -10AN Hose to -10AN Port Fitting

Stainless Steel -3 AN Straight Bulkhead Tee Adapter Brake Fitting

Aluminum -8 AN Flare Fitting Cap, Black Anodized

Russell 662051 Endura Finish Aluminum Pipe Plug-3/8 In NPT

Black Straight -4 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting

King Chrome GM One Wire Alternator, 65 Amp w/Inboard Bracket

King Chrome GM One Wire Alternator, 100 Amp w/Chrome Bracket

Mr Gasket 77C Intake Gasket, 6 X 24 Inch

FiTech 60013-30001 Programmer For 30001, 30002 Handheld Go EFI 4

FiTech 60013-30003 Programmer For FiTech 30003 Go Street EFI

-3 AN Male to 1/8 Inch NPT Male Adapter Fitting

Black Straight -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

45 Degree Flare Adaptor, AN10 to 1/2 Inch NPT

Fragola 482508-BL AN Flare Tee Fitting, -8 AN to 3/8 NPT, Black

Straight Aluminum Bulkhead Flare Fitting, Black, -3 AN

Straight Aluminum Bulkhead Flare Fitting, Black, -4 AN

Aluminum Flare Reducer Adapter, Black, -6 AN to -8 AN

VS Racing Turbo Heat Shielding Blanket, T3/T4/T6, Black/Titanium

VS Racing VSR50BOV Blow Off Valve, 50MM, Setup For Low Vac Setups