Antennas and Cables

Learn what throttle and kickdown cables do, how to install them, and tips for troubleshooting issues like broken or stuck cables.

Speedway Motors employee Jess M. talks about the custom battery tray and cables she built for her '33 Ford.

This project consists of using welding cable to relocate a battery to the trunk of a 1967 Chevelle. Learn the benefits of using welding cable over normal battery cable and how line clamps are used to secure the wire to the frame rail.

Are your gauges reading erratically or does your car run out of power at high rpm? It may be the cause of a bad ground. Speedway Motors can show you how to diagnose and fix the problem in no time at all!

Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!

Pat talks about some of our Lokar throttle cable and pedal setups.

Hose & Fitting

Ever had brand new bolts or nuts bind up on you? Take a minute to read through the steps you should take anytime you’re building an engine or installing new hardware.

Modern hot rodding often blends classic looks with modern tech. Integrating current tech in custom cars can face issues like radio noise and erratic gauges due to EMI. This guide helps diagnose and repair common EMI causes.

This article explains how to install a chrome column shifter into the steering column itself. We will help you determine the length of steering column needed along with all the parts required to get the job done.