1960 Studebaker Hawk Clevis

31 products fit your

1960 Studebaker Hawk

Add Engine

Show Direct Fit Parts

Select Hole Diameter

All

0.375"

0.3125"

0.4375"

0.5"

.375"

.38"

0.25"

0.38"

0.50"

31 products

Sort By:

Clear All

Fitment

1960 Studebaker Hawk

Department

Street

Application

Muscle Car

Products

Speedway 3/8 Inch Fine Thread Steel Clevis End

Speedway Motors |

#91631949

Speedway 3/8 Inch Fine Thread Steel Clevis End

(53)

Hole Diameter:

.38"

Thread Pitch:

3/8" UNF

Thread Type:

RH Female

$15.49

/each

Speedway Motors |

#91631516

5/16" Threaded Brake Pedal Clevis

(25)

Hole Diameter:

.38"

Thread Pitch:

5/16"-24

Thread Type:

RH Female

$20.99

/each

Speedway Motors |

#91002973

Forged Steel Yoke for 3/8 Inch Rod

(32)

Hole Diameter:

0.38"

Thread Pitch:

3/8"-24

Thread Type:

RH Female

$10.49

/each

-14%

QA1 CL6-10 Carbon Steel Clevis, 0.375 in. Bore, 5/8 in.-18 LH

QA1 |

#721CL610

QA1 CL6-10 Carbon Steel Clevis, 0.375 in. Bore, 5/8 in.-18 LH

(1)

Hole Diameter:

0.375"

Thread Pitch:

5/8"-18

Thread Type:

LH Male

$9.39

/each

$10.96

Stainless Steel Clevis, 1/2-20 Thread, 3/8 Inch Hole, Polished

Speedway Motors |

#91002044

Stainless Steel Clevis, 1/2-20 Thread, 3/8 Inch Hole, Polished

(1)

Hole Diameter:

.375"

Thread Pitch:

1/2"-20

Thread Type:

RH Male

$22.99

/each

1960 Buick Invicta by CAL Automotive Creations

This 1960 Buick blurs the line between car and fine art.

Lowering a 1967 Chevelle

In this Tech Tip, John offers some suggestions about lowering a 1967 Chevelle.

Steve's 1952 Chevy Truck

Steve Silva's '52 3100 is an eye catching truck, and it's also hiding a few surprises that were integrated by one very clever and talented builder.

Greg's '56 Chevy

Not only is Greg Turner's '56 a great driver, it's full of great family memories. Built in the home garage by Greg and his sons, this clean Chevy has covered a lot of miles.

Front Hub and Wheel Installation - 1967 Chevelle

After installing front brakes, Jeff is now ready for wheels and tires. See how a spacer is used to make his 15" wheels fit just right and a slick way to speed up the sanding and polishing process of the wheel dust caps.

Mike Earley's '69 Chevelle

Mike Earley fell in love with Chevelles when he was a little kid. Now he's lucky enough to own one of his own with a few unexpected tricks under the hood.

Small Block Chevy in a 1953 Chevy 3600

In this Tech Tip, John advises a customer on the parts needed to slip a small block Chevy engine in his 1953 Chevy 3600.

Mick's 1950 Mercury Custom

Mick Rau has a garage full of cool cars, but this Hirohata-inspired Merc is a standout.

50 Chevy Patch

Josh takes the plunge into making some patch panels for his 50 Chevy pickup truck. See how he begins the installation process to get the truck back on the road.

-13%

QA1 CR6-8 Carbon Steel Clevis, 0.375 in. Bore, 1/2 in.-20 RH

QA1 |

#721CR68

QA1 CR6-8 Carbon Steel Clevis, 0.375 in. Bore, 1/2 in.-20 RH

(1)

Head Diameter:

Hole Diameter:

0.375"

Thread Pitch:

1/2"-20

$7.39

/each

$8.57

Speedway Motors |

#91002014

Speedway Motors Clevis, 1/2-20 Thread, 3/8 Inch Hole, Chrome

Hole Diameter:

.375"

Thread Pitch:

1/2"-20

Thread Type:

RH Male

$9.99

/each

QA1 CR6-10CP Carbon Steel Clevis, 0.375 in. Bore, 5/8-18 RH

QA1 |

#721CR610CP

QA1 CR6-10CP Carbon Steel Clevis, 0.375 in. Bore, 5/8-18 RH

(1)

Hole Diameter:

0.375"

Thread Pitch:

5/8"-18

Thread Type:

RH Male

$15.49

/each

QA1 CR6-10 Carbon Steel Clevis, 0.375 in. Bore, 5/8 in.-18 RH

QA1 |

#721CR610

QA1 CR6-10 Carbon Steel Clevis, 0.375 in. Bore, 5/8 in.-18 RH

(1)

Hole Diameter:

0.375"

Thread Pitch:

5/8"-18

Thread Type:

RH Male

$13.99

/each

-16%

QA1 CR5-8 Carbon Steel Clevis, 0.313 in. Bore, 1/2 in.-20 RH

QA1 |

#721CR58

QA1 CR5-8 Carbon Steel Clevis, 0.313 in. Bore, 1/2 in.-20 RH

Hole Diameter:

0.3125"

Thread Pitch:

1/2"-20

Thread Type:

RH Male

$7.19

/each

$8.60

-17%

QA1 CL6-8 Carbon Steel Clevis, 0.375 in. Bore, 1/2 in.-20 LH

QA1 |

#721CL68

QA1 CL6-8 Carbon Steel Clevis, 0.375 in. Bore, 1/2 in.-20 LH

Hole Diameter:

0.375"

Thread Pitch:

1/2"-20

Thread Type:

LH Male

$8.19

/each

$9.92

-13%

QA1 CR4-5 Carbon Steel Clevis, 0.250 in. Bore, 5/16 in.-24 RH

QA1 |

#721CR45

QA1 CR4-5 Carbon Steel Clevis, 0.250 in. Bore, 5/16 in.-24 RH

Hole Diameter:

0.25"

Thread Pitch:

5/16"-24

Thread Type:

RH Male

$7.19

/each

$8.36

-16%

QA1 CR8-12-1 Carbon Steel Clevis, 0.500 in. Bore, 3/4-16 RH

QA1 |

#721CR8121

QA1 CR8-12-1 Carbon Steel Clevis, 0.500 in. Bore, 3/4-16 RH

(1)

Hole Diameter:

0.5"

Thread Pitch:

3/4"-16

Thread Type:

RH Male

$9.19

/each

$10.96

-14%

QA1 CL5-8 Carbon Steel Clevis, 0.313 in. Bore, 1/2 in.-20 LH

QA1 |

#721CL58

QA1 CL5-8 Carbon Steel Clevis, 0.313 in. Bore, 1/2 in.-20 LH

Hole Diameter:

0.3125"

Thread Pitch:

1/2"-20

Thread Type:

LH Male

$7.39

/each

$8.60

QA1 CL5-6 Carbon Steel Clevis, 0.313 in. Bore, 3/8 in.-24 LH

QA1 |

#721CL56

QA1 CL5-6 Carbon Steel Clevis, 0.313 in. Bore, 3/8 in.-24 LH

Hole Diameter:

0.3125"

Thread Pitch:

3/8"-24

Thread Type:

LH Male

$7.39

/each

-13%

QA1 CR5-5 Carbon Steel Clevis, 0.313 in. Bore, 5/16 in.-24 RH

QA1 |

#721CR55

QA1 CR5-5 Carbon Steel Clevis, 0.313 in. Bore, 5/16 in.-24 RH

(2)

Hole Diameter:

0.3125"

Thread Pitch:

5/16"-24

Thread Type:

RH Male

$7.19

/each

$8.35

-16%

QA1 CR8-10 Carbon Steel Clevis, 0.500 in. Bore, 5/8 in.-18 RH

QA1 |

#721CR810

QA1 CR8-10 Carbon Steel Clevis, 0.500 in. Bore, 5/8 in.-18 RH

(4)

Hole Diameter:

0.5"

Thread Pitch:

5/8"-18

Thread Type:

RH Male

$9.19

/each

$10.96

-16%

QA1 CL8-12-1 Carbon Steel Clevis, 0.500 in. Bore, 3/4-16 LH

QA1 |

#721CL8121

QA1 CL8-12-1 Carbon Steel Clevis, 0.500 in. Bore, 3/4-16 LH

(1)

Hole Diameter:

0.5"

Thread Pitch:

3/4"-16

Thread Type:

LH Male

$9.19

/each

$10.96

-5%

QA1 CR5-6 Carbon Steel Clevis, 5/16 Bore

QA1 |

#721CR56

QA1 CR5-6 Carbon Steel Clevis, 5/16 Bore

Hole Diameter:

0.3125"

Thread Pitch:

3/8"-24

Thread Type:

RH Male

$7.39

/each

$7.82

-16%

QA1 CL8-10 Carbon Steel Clevis, 0.500 in. Bore, 5/8 in.-18 LH

QA1 |

#721CL810

QA1 CL8-10 Carbon Steel Clevis, 0.500 in. Bore, 5/8 in.-18 LH

Hole Diameter:

0.5"

Thread Pitch:

5/8"-18

Thread Type:

LH Male

$9.19

/each

$10.96

-13%

QA1 CL4-5 Carbon Steel Clevis, 0.250 in. Bore, 5/16 in.-24 LH

QA1 |

#721CL45

QA1 CL4-5 Carbon Steel Clevis, 0.250 in. Bore, 5/16 in.-24 LH

Hole Diameter:

0.25"

Thread Pitch:

5/16"-24

Thread Type:

LH Male

$7.19

/each

$8.36

Speedway Motors |

#6680116

3/8 X 3/8 Clevis

(1)

Hole Diameter:

0.375"

Thread Pitch:

3/8"-24

Thread Type:

RH Male

$10.49

/each

-8%

QA1 CL5-5 Carbon Steel Clevis, 0.313 in. Bore, 5/16 in.-24 LH

QA1 |

#721CL55

QA1 CL5-5 Carbon Steel Clevis, 0.313 in. Bore, 5/16 in.-24 LH

(1)

Hole Diameter:

0.3125"

Thread Pitch:

5/16"-24

Thread Type:

LH Male

$7.19

/each

$7.82

-17%

QA1 CR7-10 Carbon Steel Clevis, 0.438 in. Bore, 5/8 in.-18 RH

QA1 |

#721CR710

QA1 CR7-10 Carbon Steel Clevis, 0.438 in. Bore, 5/8 in.-18 RH

(2)

Hole Diameter:

0.4375"

Thread Pitch:

5/8"-18

Thread Type:

RH Male

$8.99

/each

$10.96

-16%

QA1 CR7-8 Carbon Steel Clevis, 0.438 in. Bore, 1/2 in.-20 RH

QA1 |

#721CR78

QA1 CR7-8 Carbon Steel Clevis, 0.438 in. Bore, 1/2 in.-20 RH

(1)

Hole Diameter:

0.4375"

Thread Pitch:

1/2"-20

Thread Type:

RH Male

$9.19

/each

$10.96

Speedway Motors |

#91002975

Forged Steel Yoke for 1/2 Inch Rod

(1)

Hole Diameter:

0.50"

Thread Pitch:

1/2"-20

Thread Type:

RH Female

$13.49

/each

-17%

QA1 CL7-8 Carbon Steel Clevis, 0.438 in. Bore, 1/2 in.-20 LH

QA1 |

#721CL78

QA1 CL7-8 Carbon Steel Clevis, 0.438 in. Bore, 1/2 in.-20 LH

Hole Diameter:

0.4375"

Thread Pitch:

1/2"-20

Thread Type:

LH Male

$8.99

/each

$10.96

-15%

QA1 CL6-8-2CP Carbon Steel Clevis, 0.375 in. Bore, 1/2-20 LH

QA1 |

#721CL682CP

QA1 CL6-8-2CP Carbon Steel Clevis, 0.375 in. Bore, 1/2-20 LH

Hole Diameter:

0.375"

Thread Pitch:

1/2"-20

Thread Type:

LH Male

$10.49

/each

$12.47

QA1 CL7-10 Carbon Steel Clevis, 0.438 in. Bore, 5/8 in.-18 LH

QA1 |

#721CL710

QA1 CL7-10 Carbon Steel Clevis, 0.438 in. Bore, 5/8 in.-18 LH

Hole Diameter:

0.4375"

Thread Pitch:

5/8"-18

Thread Type:

LH Male

$10.99

/each

-11%

QA1 CL6-8-1CP Carbon Steel Clevis, 0.375 in. Bore, 1/2-20 LH

QA1 |

#721CL681CP

QA1 CL6-8-1CP Carbon Steel Clevis, 0.375 in. Bore, 1/2-20 LH

Hole Diameter:

0.375"

Thread Pitch:

1/2"-20

Thread Type:

LH Male

$10.99

/each

$12.47

-13%

QA1 CR6-12 Carbon Steel Clevis, 0.375 in. Bore, 3/4 in.-16 RH

QA1 |

#721CR612

QA1 CR6-12 Carbon Steel Clevis, 0.375 in. Bore, 3/4 in.-16 RH

Hole Diameter:

0.375"

Thread Pitch:

3/4"-16

Thread Type:

RH Male

$9.49

/each

$10.96

Showing all 31 results

Shop Feedback:

Did you find what you are looking for?

1960 Studebaker Hawk Clevis

Hole Diameter

Brand

Availability

Discounts

Price

Customer Rating

Products

Speedway 3/8 Inch Fine Thread Steel Clevis End

5/16" Threaded Brake Pedal Clevis

Forged Steel Yoke for 3/8 Inch Rod

QA1 CL6-10 Carbon Steel Clevis, 0.375 in. Bore, 5/8 in.-18 LH

Stainless Steel Clevis, 1/2-20 Thread, 3/8 Inch Hole, Polished

Related Articles

QA1 CR6-8 Carbon Steel Clevis, 0.375 in. Bore, 1/2 in.-20 RH

Speedway Motors Clevis, 1/2-20 Thread, 3/8 Inch Hole, Chrome

QA1 CR6-10CP Carbon Steel Clevis, 0.375 in. Bore, 5/8-18 RH

QA1 CR6-10 Carbon Steel Clevis, 0.375 in. Bore, 5/8 in.-18 RH

QA1 CR5-8 Carbon Steel Clevis, 0.313 in. Bore, 1/2 in.-20 RH

QA1 CL6-8 Carbon Steel Clevis, 0.375 in. Bore, 1/2 in.-20 LH

QA1 CR4-5 Carbon Steel Clevis, 0.250 in. Bore, 5/16 in.-24 RH

QA1 CR8-12-1 Carbon Steel Clevis, 0.500 in. Bore, 3/4-16 RH

QA1 CL5-8 Carbon Steel Clevis, 0.313 in. Bore, 1/2 in.-20 LH

QA1 CL5-6 Carbon Steel Clevis, 0.313 in. Bore, 3/8 in.-24 LH

QA1 CR5-5 Carbon Steel Clevis, 0.313 in. Bore, 5/16 in.-24 RH

QA1 CR8-10 Carbon Steel Clevis, 0.500 in. Bore, 5/8 in.-18 RH

QA1 CL8-12-1 Carbon Steel Clevis, 0.500 in. Bore, 3/4-16 LH

QA1 CR5-6 Carbon Steel Clevis, 5/16 Bore

QA1 CL8-10 Carbon Steel Clevis, 0.500 in. Bore, 5/8 in.-18 LH

QA1 CL4-5 Carbon Steel Clevis, 0.250 in. Bore, 5/16 in.-24 LH

3/8 X 3/8 Clevis

QA1 CL5-5 Carbon Steel Clevis, 0.313 in. Bore, 5/16 in.-24 LH

QA1 CR7-10 Carbon Steel Clevis, 0.438 in. Bore, 5/8 in.-18 RH

QA1 CR7-8 Carbon Steel Clevis, 0.438 in. Bore, 1/2 in.-20 RH

Forged Steel Yoke for 1/2 Inch Rod

QA1 CL7-8 Carbon Steel Clevis, 0.438 in. Bore, 1/2 in.-20 LH

QA1 CL6-8-2CP Carbon Steel Clevis, 0.375 in. Bore, 1/2-20 LH

QA1 CL7-10 Carbon Steel Clevis, 0.438 in. Bore, 5/8 in.-18 LH

QA1 CL6-8-1CP Carbon Steel Clevis, 0.375 in. Bore, 1/2-20 LH

QA1 CR6-12 Carbon Steel Clevis, 0.375 in. Bore, 3/4 in.-16 RH

Popular Parts