Product Summary

Universal Fit, 2-Barrel Carburetor Barrels, 184 CFM CFM

  • These 9 Super 7® carburetors are built with 100% all new parts to ensure hassle free performance
  • Base assembly is aluminum instead of the original cast iron material to allow for cooler fuel temps and better fuel efficiency
  • The original troublesome needle and seat has been replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running
  • A modern nitrophyl float and neoprene gaskets are used to accommodate modern fuels
  • The choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts

Key Specs

Carburetor Barrels2-Barrel
Fuel TypeGasoline
Choke TypeManual
CFM Range100-199 CFM

Need To Know

This Product Will Ship Free

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Speedway Motors 91511655 Details

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on 30s and 40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetors original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result!

Aesthetically, the 9 Super 7® is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7® shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7® makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All thats required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7® when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs. See ourMultiple Carburetor Tech Tipfor more information on using the 9 Super 7® in a 2x2 or 3x2 carb set-up.

On the primary 9 Super 7® carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running
  • Will not stick or dribble like the oldViton-tipped needle and seat setups
  • Grose-style jet valve wont corrode in modern fuel, something the original needle and seat units cant do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage

Note: Not recommended for use with Ethanol fuels. These are not compatible with E85

Recipient of the NSRA 2009 Best New Product Award
Recipient of the Goodguys Best New Product Award - Engine and Transmission, Goodguys PPG Nationals 2009



  • Speedy's 9 Super 7® features .045" main metering jets and a number 65 power valve, which is the same as a stock carb.
  • Includes base gasket.
  • 3 Carb kits include one primary carburetor and two secondary carburetors
  • Note: There is no provisions for a vacuum advance line. Ford & Mercury engines 1949-1953 using stock distributors will need an alternative place to connect the vacuum line.
  • Replacement Jet Access Plug Gasket = 91011542 
  • Replacement Needle & Seat Gasket = 91011543

Our independent tests produced these flow numbers:

  •   3" of Vacuum - 60 CFM
  • 10" of Vacuum - 110 CFM
  • 15" of Vacuum - 136 1/2 CFM
  • 28" of Vacuum - 184 CFM

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Speedway Motors 91511655 Specifications

MFG. Part #91511655
BrandSpeedway Motors
Carburetor Barrels2-Barrel
Fuel TypeGasoline
Choke TypeManual
CFM Range100-199 CFM
Carburetor Flange Type2-Barrel 3-Bolt
Secondary TypeMechanical
Gasket(s) IncludedYes
New or RemanufacturedNew
NotesIncludes base gasket, 0.045" jets and 65 power valve (same as stock). Flow #s are 3" vacuum 60 cfm, 10" vacuum 110 cfm, 15" at 136.5 cfm, 28" at 184 cfm.
Sold in QuantityEach