Product Summary

Connect and Cruise Crate Engine Type, Oil Pan Included

  • BluePrint Bronco Edition 302 delivers 365 horsepower and 365 ft.-lbs. of torque for strong all-around performance
  • Holley Sniper 2 EFI system adds modern fuel injection, easier starts, and improved drivability over carbureted setups
  • Aluminum heads, hydraulic roller cam, and 9.5:1 compression provide a solid balance of power, response, and 87-plus octane compatibility
  • Complete black front accessory drive package includes alternator, power steering pump, air conditioning compressor, and dual/rear sump oil pan
  • Includes 4WD-ready 4R70W overdrive automatic transmission package with controller, torque converter, lockup, and Dana 20 transfer case prep for classic Bronco builds
See more details

Key Specs

Crate Engine TypeConnect and Cruise
Compression Ratio9.5:1
Engine Displacement302 cu. in.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
See more specs

Need To Know

Made to Order

This custom item will ship when completed

Truck Shipment

Truck shipments must be pre-paid with a credit card, certified check or money order

Quick and Easy Returns

Return Policy

BluePrint Engines B302FKB4WDB Details

This BluePrint Builder Series Bronco Edition 302 c.i. engine and 4R70W automatic transmission package is built to bring classic Bronco projects modern power, drivability, and overdrive performance in one complete setup. With 365 horsepower and 365 ft.-lbs. of torque, aluminum heads, a hydraulic roller cam, Holley Sniper 2 EFI, and a black front accessory drive, this fuel-injected small block Ford package is designed for strong street and trail capability while being specifically prepped for Dana 20 transfer case use in 1966-1976 Bronco applications.

  • BluePrint Bronco Edition 302 delivers 365 horsepower and 365 ft.-lbs. of torque for strong all-around performance
  • Holley Sniper 2 EFI system adds modern fuel injection, easier starts, and improved drivability over carbureted setups
  • Aluminum heads, hydraulic roller cam, and 9.5:1 compression provide a solid balance of power, response, and 87-plus octane compatibility
  • Complete black front accessory drive package includes alternator, power steering pump, air conditioning compressor, and dual/rear sump oil pan
  • Includes 4WD-ready 4R70W overdrive automatic transmission package with controller, torque converter, lockup, and Dana 20 transfer case prep for classic Bronco builds

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • 4-Bolt Main
  • 4.000" Bore
  • 1-Piece Rear Main Seal

Rotating Assembly:

  • Cast Crankshaft
  • 3.000" Stroke
  • OEM Type 5.090" Connecting Rods
  • Hypereutectic Pistons
  • 50oz External Balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP9009
  • 60cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 190cc Intake / 60cc Exhaust Runners

Cam Specs:

  • Cam Type: Roller
  • .533 Intake / .544 Exhaust Lift
  • 215 Intake / 220 Exhaust Duration
  • @.050-114 Degree Lobe Separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Dual Plane, Satin Aluminum Intake Manifold
  • Holley Sniper 2 EFI System - BPP550-510-3XX
  • EFI Fuel Pump Kit - BPP5267
  • Spark Plugs and Wires
  • Distributor
  • Valve Covers
  • Dual/Rear Sump Oil Pan
  • Black Front Accessory Drive - BPP302FDACPS4BK
  • Driver Side Standard Rotation Water Pump
  • Type II Power Steering Pump
  • Remote Power Steering Pump Reservoir
  • 140amp 1-wire Alternator
  • 7B10 Peanut Air Conditioning Compressor

Assembled with Complete 4R70W 4WD Ready – Automatic Transmission Package:

  • Includes Electronic Transmission Controller
  • Transmission Built to 650 HP
  • 2200-2600 Stall Torque Converter
  • Flex Plate
  • Starter
  • TPS Breakout Harness Included for Integration with Transmission Controller
  • 4 Speed, Overdrive transmission w/Lockup
  • Specifically Prepped for Dana 20 Transfer Case (1966-1976). Transfer case is NOT included.
  • GEAR RATIOS

First: 2.84 :1

Second: 1.55 :1

Third: 1.00 :1

Overdrive: 0.70 :1

Reverse: 2.32 :1

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

BluePrint Engines B302FKB4WDB Specifications

KEY SPECS
MFG. Part #B302FKB4WDB
BrandBluePrint Engines
Crate Engine TypeConnect and Cruise
Compression Ratio9.5:1
Engine Displacement302 cu. in.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
Piston MaterialHypereutectic Aluminum
Crankshaft MaterialCast Steel
Carburetor IncludedNo
Intake Manifold IncludedYes
Distributor IncludedYes
Connecting Rod MaterialForged Steel
Valve Covers IncludedYes
Cylinder Heads IncludedYes
Throttle Body IncludedYes
Timing Cover IncludedYes
Oil Pan IncludedYes
Water Pump IncludedYes
Harmonic Balancer IncludedYes
Flexplate IncludedNo
Flywheel IncludedYes
Air Cleaner IncludedYes
Spark Plugs IncludedYes
Spark Plug Wires IncludedYes
Computer IncludedYes
Wiring Harness IncludedYes
GENERAL
Torque365 ft./lbs.
Horsepower365 horsepower
Combustion Chamber Volume60cc
Camshaft Duration (.050 in)215° intake / 220° exhaust
Sold in QuantityKit

Questions & Answers

Fitment

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

  • Ford 302

Customer Impersonation Script