Studebaker Transtar Crimping Tools

Crimping or soldering automotive wiring are both viable options, but in some cases, it is preferable to do one vs the other

Learn how to install spark plug wire terminal ends. Our step by step guide takes you through terminal end and boot installation with the use of a wire crimping tool.

Broken exhaust studs are a common problem. This article describes what you need and how to remove a broken stud from an exhaust manifold. Learn how simple it is to remove broken or stubborn studs with a Titan Tools stud extractor tool.

Follow this how-to as Kevin explains the process of removing the hood on his '54 Chevy Bel Air using a handmade Hood Spring tool.

Many sanctioning bodies now require mud covers to be bolted to the wheel and the mounting tabs to be integral or welded to the wheel. This article explains how to properly bolt on mud covers and the tools required to do so.

The benefit of using adjustable shocks and why the CSI cockpit shock adjuster assembly is the most precise on the market. Find out more on how this product works and why it's important to fine tune your shocks at the track.

Learn how to use a windshield remover tool to assist with in-depth builds. A step-by-step guide to windshield removal.

Follow this step-by-step guide to learn how to use Speedway Motors 37 Degree Flaring Tool.

In this video, Joe and Darrian discuss and demonstrate how to properly set up and use the Speedway Tubing Notcher. It’s the perfect tool for fabricators and hobbyists alike! Use it to make headers, custom chassis, roll cages, or anything in between.

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.