Studebaker Hawk 700R4 Chassis and Suspension Parts

The 700R4 is a great choice when it's time to upgrade your classic car or truck with an overdrive transmission. Here's what you need to know about GM's famous 4-speed automatic.

Follow along as Jeff installs an early 700R4 transmission for the big block in his 1967 Chevelle. See how this unit is upgraded and converted to a later 30 spline style.

We show you how to keep that old GM transmission when swapping in an LS engine. Our LS swap adapter kits make it easy!

Caster and camber are critical adjustments to your car's suspension alignment. It's important to understand what caster and camber are as well as how they can affect your car's performance.

In this Tech Tip, John responds to a customer question about the rod end angle on his Model A 4-Bar Suspension Kit.

Click to learn about split wishbone, hairpin radius rod, and four bar suspensions. Learn the history and difference between these solid axle suspension designs.

There's a lot going on with your car's front suspension geometry. This guide covers some of the most important suspension concepts, from caster and camber to toe and Ackerman angle.

This article guides you through the process of repairing and painting a subframe for a 1967 Poncho Firebird. See how the front suspension gets an overhaul including new G-comp spindles and a disc brake kit.

We will show you the differences among traditional I-beam and tube axles and suspension designs used on hot rods; the differences between cross and traditional steering, measuring for springs, what spindles to choose, and much more.

This article highlights the finishing touches of the front suspension in Jeff's Chevelle. Learn some tips on how to install the steering arms, center link and tie rod assembly.