|
#91628905
Universal Tubular Transmission Crossmember Kit, 6" Drop Mount
- Heavy duty 1 3/4" OD steel tubing with .109" wall thickness provides a stable foundation to mount your transmission
- Fits most GM, Ford, and Mopar manual or automatic transmissions
- Crossmember must be welded directly into frame or weld on the supplied 3-hole mounting flanges for a bolt-in application
$97.99
/each
In Stock
Garage Sale alternatives: from $81.99
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 1.55" Tube I.D., 1.75" Tube O.D., Steel
- Heavy duty 1 3/4" OD steel tubing with .109" wall thickness provides a stable foundation to mount your transmission
- Fits most GM, Ford, and Mopar manual or automatic transmissions
- Crossmember must be welded directly into frame or weld on the supplied 3-hole mounting flanges for a bolt-in application
- Fits frames up to 38" wide making this crossmember versatile for a variety of applications
- The 6" drop is measured from the top of crossmember tube to top of mounting plate
Key Specs
| Overall Length | 38.25" |
| Centerline of Holes | 2.00" |
| Drop | 6" |
| Material Type | Steel |
| Finish | Natural |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91628905 Details
Speedway Motors 91628905 Details
Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Raw steel finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.
Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.
Specs
- Tubing diameter is 1-3/4" O.D.
- The trans mount uses slotted holes to accomodate standard GM and Ford mounts with a bolt spacing range of 1/2" to 2-1/2"
- The triangular mount flanges measure 2-3/4" between bolt holes, and 3-1/4" overall
- The mount holes are 3/8" in diameter
Speedway Motors 91628905 Specifications
Speedway Motors 91628905 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91628905 |
| Brand | Speedway Motors |
| Overall Length | 38.25" |
| Centerline of Holes | 2.00" |
| Drop | 6" |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Tube I.D. | 1.55" |
| Tube O.D. | 1.75" |
| Sold in Quantity | Each |
| Notes | The 6 inch drop is measured from the top of crossmember tube to top of mounting plate. |
Ratings & Reviews
4.8
38 Reviews
Customers highly recommend this product, praising its quality, usability, and practicality. Users noted its ease of installation, with some creating custom mounts for specific needs. The robust construction of the product was frequently mentioned, indicating good material quality and durability. Many customers have reused it and are likely to purchase it again. Its versatility is a standout feature, with it being used on a variety of vehicle models. Some customers highlighted that minimal fabrication was needed, indicating good adaptability. Some even designed their own end plates, suggesting the product supports customization. The product significantly saved time compared to alternative methods. However, some pointed out the inconvenience of it being pre-painted due to post-installation alterations.
Ratings & Reviews
4.8
38 Reviews
Customers highly recommend this product, praising its quality, usability, and practicality. Users noted its ease of installation, with some creating custom mounts for specific needs. The robust construction of the product was frequently mentioned, indicating good material quality and durability. Many customers have reused it and are likely to purchase it again. Its versatility is a standout feature, with it being used on a variety of vehicle models. Some customers highlighted that minimal fabrication was needed, indicating good adaptability. Some even designed their own end plates, suggesting the product supports customization. The product significantly saved time compared to alternative methods. However, some pointed out the inconvenience of it being pre-painted due to post-installation alterations.
4.8
38 reviews
5
33
4
4
3
1
2
0
1
0
Most Liked Positive Review
5.0
This product was perfect for my applicat
This Speedway Motors tubular transmission cross member with 6" drop was perfect for my 37 Ford coupe project with a Borg Warner T-5 transmission. I was able to trim the ends of the tubes to fit exactly where it needed to be between the frame rails. The bolt on mounting flange is just what I needed to make the cross member removable when needed. Great product!
Most Liked Negative Review
3.0
Versatile!
I bought this crossmember for my 37 Plymouth pick-up build. It worked great. The material was easy to work with. Not crazy about it being pre-painted because you still need to cut/fit/weld it in place and then come back and paint it again. But I did like it enough that I bought another one that I used as a crosstube between the frame where my ladder bar mounts are, I wanted to match the bend with the trans mount, so with some mods, It worked great.
Filter by Ratings
Yes
5.0
5 months ago
Gray Beard
Tx
Verified
Worked great
Would Recommend
Great option for our project!!!
4.0
9 months ago
Simon
Phoenix, Az
Verified
This was a great option for our project. We knew we were going to have to modify whatever we purchased. This mount gave us a good starting point. In the end saved us time and money!!!
Would Recommend
I would buy again
5.0
a year ago
Frosty
Iowa
Verified
Fits good for my application
Would Recommend
i would buy this again
5.0
a year ago
jay
LINDON
Verified
well built great price easy to install
Would Recommend
I would buy it again
5.0
a year ago
Mike
Southern Virginia
Verified
Worked perfectly.
Would Recommend
i would buy this again
5.0
2 years ago
hardtop
W.A. Australia
Verified
great product perfect as described well made thank you
Would Recommend
great product exact fit i would recmend it to anyone
5.0
2 years ago
SXY23T
windsor illinois
Verified
it was easy to install and fit perfect
Would Recommend
Exactly what was needed for my 23 T bucket project
5.0
2 years ago
Bucket man
Rices Landing, PA
Verified
Nice piece. Heavy enough steel for the project. Well made. Worked perfect for the 23 T bucket I am building.
Would Recommend
have used this in the past and would use again
5.0
3 years ago
Horses and hot rods ranch
Argyle NY
Verified
Needed for a custom install Chrysler trans, measured my drop and went with it making my own mount to Dodge transmission. easy install.
Would Recommend
Great product and it looks great to
5.0
4 years ago
Michael
Whitewater
Verified
Easy to use
Showing 10 of 38 reviews
Questions & Answers
Questions & Answers
3 Questions • 3 Answers
will this work with a ford AOautomatic transmissionD
by landzone5@aol.com
• 8 years ago
1 answer
View Answer
What cushion/mount do you recommend with the #91628905 6" drop crossmember? I am using a 700R4 transmission.
by Tom
• 9 years ago
1 answer
View Answer
Could this be used on a 1999 manual ford ranger 2 wheel drive?
by OZZY
• 15 years ago
1 answer
View Answer
3 of 3 questions shown