Ford F2 Fasteners and Hardware Parts

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Speedway Motors employee Pat takes a few minutes to talk about the Mag Daddy Magnetic Fasteners available at Speedway Motors.

In this Tech Tip, a customer asked about a discreet style trunk latch for his 1932 Ford.

Preventative maintenance is crucial for hot rods. In this article, Jess shows you how to place a front wheel cylinder on an early Ford.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

This article guides you through the process of repairing and painting a subframe for a 1967 Poncho Firebird. See how the front suspension gets an overhaul including new G-comp spindles and a disc brake kit.

Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!

Sending your straight axle street rod to the alignment shop can be expensive, but if you have the right tools you can do it yourself in your own garage.

In this Tech Tip, a customer asked about finding a set of disc brakes for his 1949 Ford F1 pickup, with one caveat. He wants to use the factory wheels.