Pico Buick Fasteners and Hardware Parts

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

Follow this visual guide on installing spacer rings for Buick style finned brake drums to help center the drum on the hub. Learn some tips on using old and new parts for the installation.

Ever had brand new bolts or nuts bind up on you? Take a minute to read through the steps you should take anytime you’re building an engine or installing new hardware.

Tim explains the process of adjusting Buick Finned Drums to fit Speedway's self-energizing backing plate assembly.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

Learn how to install spark plug wire terminal ends. Our step by step guide takes you through terminal end and boot installation with the use of a wire crimping tool.

Learn how to replace the hinges on your vehicle. Follow along as our expert replaces the hinge pins and bushings on his 1976 Chevrolet Laguna S3 with a kit.

Piston rings may not be the most exciting part of an engine build, but knowing how to clock piston rings and how to install rings on a piston is critical to your engine performing properly.

Everyone loves boost and nitrous. But proper piston rings and end gaps are necessary to keep your engine alive. Lake Speed Jr. from Total Seal joins us to talk about the right rings for engines with nitrous and boost.