AMC AMX Spanner Wrenches

Check out a couple of tips on how to install a new clutch.

In this Tech Tip, John responds to a customer request for our thoughts on an axle kit for his project.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

Our hot rod expert takes you through his ford I beam axle setup. Follow as he sets up the front end on his split wishbone front suspension Model A.

Read about the wheel and tire combination that was chosen for a 1931 Model A Coupe. Learn tips for choosing wheels and tires and how to complete the installation.

Learn how to assemble the front axle of a sprint car. See what tools are needed for assembly including an angle finder gauge tool and king pin reamer.

In this Tech Tip, John answers a customer question about finding the right axle length for his 1931 Model A.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

Choosing new wheels for a GMC Chevrolet truck. This project uses Speedway Motors GM Rally Wheels and new tires to enhance the appearance of the truck.

Follow this visual guide on installing spacer rings for Buick style finned brake drums to help center the drum on the hub. Learn some tips on using old and new parts for the installation.