AC 428 Hammers

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Tim talks about the process of upgrading the factory hubs on his 1929 Roadster project with new manufacture units courtesy of Speedway Motors.

Learn the proper steps in upgrading your air cleaner assembly to ensure clean air, allowing your engine to more easily make the power that it should.

In this Tech Tip, John answers a customer question about finding the right axle length for his 1931 Model A.

In this Tech Tip, John offers up a couple solutions to a customer on the hunt for a coil over kit for his 2-door Model A.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

Rebuilding a carburetor or renewing it is not as hard or intimidating as it looks. This article will guide you through the steps using a Holley rebuild kit.

Learn how to lower a hot rod by modifying the axles and some history behind early hop ups. This project features a Ford axle with wishbones for a Model A.