1966 Studebaker Cruiser Sniper EFI 2 Conversion System Parts

Follow this detailed guide on installing a FiTech EFI system in a '67 Chevelle. Learn helpful tips along the way including how to route the blue trigger wire away from the coil and ignition system.

What's the best way to handle an LS swap fuel pump? Watch for some tips and tricks as we assemble the in-tank pump to feed our 5.3-powered C10 truck project.

Trying to decide if you want to change to fuel injection in your car? The simplicity of EFI conversions are leaps & bounds from where they were a few years ago. Kevin explains how to choose an EFI setup and walks through the installation process.

A step by step on how to install an EFI Fuel Tank kit in a 1967 Chevelle. Learn the benefits of using this kit including expanded fuel capacity and a 24 gallon tank.

Jeff walks through how to install an EFI filter for his fuel system. See how to assemble conversion fittings to accurately plumb the fuel lines and tips on fuel line routing.

See the final steps of installing a custom exhaust system on a '67 Chevelle. Learn some tips on how to offset and install the exhaust U bend tailpipe.

Next up is the suspension on Jeff's 1967 Chevelle project. Learn how to properly disassemble and remove components, such as the spindles and brakes. See tips on replacing the control arm bushings and using the right tools to get the job done.

Learn how to replace a fuel sending unit. Our fuel gauge sending unit guide and installation video covers all you need to match your fuel sender and gauge.