New Product

WindChill® 67-69 GM F Body Radiator Aluminum Fan Shroud, Plain

New Product

#917717-PLN

WindChill® 67-69 GM F Body Radiator Aluminum Fan Shroud, Plain

Constructed with 0.063-inch (approximately 14-gauge) 3003 sheet aluminum, laser cut and press bent for strength and reliability
Designed for direct fit to Windchill® 67-69 GM F-Body aluminum radiators, may fit other OEM-style radiators
Pre-cut to fit a single 16-inch electric cooling fan for maximum airflow through your radiator's core

Finish:

Plain

$74.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

67-69 Chevy Camaro, 67-69 Pontiac Firebird, 1.00" Depth

Constructed with 0.063-inch (approximately 14-gauge) 3003 sheet aluminum, laser cut and press bent for strength and reliability
Designed for direct fit to Windchill® 67-69 GM F-Body aluminum radiators, may fit other OEM-style radiators
Pre-cut to fit a single 16-inch electric cooling fan for maximum airflow through your radiator's core
Shroud is cut for pressure relief flaps (included) to aid in maximizing cooling at speed
Easy installation on WindChill® radiators with included shroud mounting hardware

See more details

Key Specs

Overall Width	21.13"
Overall Height	18.63"
Depth	1.00"
Material Thickness	0.0625"
Material Type	Aluminum

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 917717-PLN Details

Designed to fit our WindChill® 67-69 GM F-Body radiators
Built from .063-inch 3003 H14 sheet aluminum, laser cut, and press bent
Features pre-cut electric fan opening for one 16-inch electric fan
Designed to work with most any 16-inch cooling fan (15.5-inch fan opening)
Fan shroud weighs just a bit more than two pounds
Mounts via radiator’s upper and lower core hat channel edges
Fan shroud includes four pressure relief flaps and 10-24 mounting hardware
Electric fans and wiring/relay kit sold separately

Direct Mount a Single 16-Inch Cooling Fan with Ease Using Our 67-69 GM F-Body Fan Shroud

The engine driven fan found in the GM’s F-Body muscle cars provides a simple solution to pulling ambient air through the truck’s radiator to reduce cooling system temperatures. It has worked well in stock engine/chassis environments but can often become a source of frustration when performing engine swaps or upgrading to thicker radiators to combat elevated temperatures in performance engine builds. Often enthusiasts will upgrade to a serpentine accessory drive that no longer supports an engine driven fan either. Enter the electric cooling fan.

The electric cooling fan, once a staple of engine swaps and race car builds has become the preferred OEM cooling fan of choice, and for several great reasons. They do not take away from engine horsepower, provide a much more compact cooling fan solution, and can be controlled via a cooling fan controller (such as a manual switch, thermal switch, modulated fan controller, etc.). The only drawback to an electric cooling fan has been in how to mount them to your radiator. Through the core mounts and universal brackets are the norm, but neither product is a secure fan mount and can damage your radiator’s core fins or tubes. Our new 67-69 Camaro electric fan shroud provides a quick and secure way to mount a single 16-inch electric cooling fan while also providing an effective cooling solution by forcing air to be pulled through the whole radiator core and not just through the fan’s diameter area.

Designed For Direct Fit to Our 67-69 GM F-Body WindChill® Radiators

We made our aluminum fan shroud to fit our 70-81 2nd gen F-Body small block Chevy single pass and LS-swap double pass direct fit WindChill® radiators. These radiators feature an OEM-style “hat channel” top and bottom with slotted mounting holes that match the six mounting holes in the fan shroud. With the hardware included, the aluminum radiator shroud is a bolt on with zero modifications. This aluminum radiator shroud should work for most OEM-spec 67-69 F-Body radiators with similar top and bottom channels as well, though you may have to drill your own mounting holes in those radiators. The pre-cut fan opening is designed to work with most any 16-inch cooling fan and the addition of four rubber pressure relief flaps will help for highway speed cooling by preventing air pressure from building up between the fan and radiator core.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

Speedway Motors 917717-PLN Specifications

KEY SPECS
MFG. Part #	917717-PLN
Brand	Speedway Motors
Overall Width	21.13"
Overall Height	18.63"
Depth	1.00"
Material Thickness	0.0625"
Material Type	Aluminum
Finish	Raw
Hardware Included	Yes

GENERAL
Cooling Fan	Single
Hole Diameter	16.00"
Installation Type	Bolt-On / Screw-On
Color	Natural
Sold in Quantity	Each

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.

Fitment

1967-1969 Chevy Camaro

1967-1969 Pontiac Firebird