Speedway Small Block Chevy Top-End Kit

Info

Notes

Additional Information:

• 910-8002 BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head
  • Designed and produced by BluePrint Engines
  • Fully assembled with heavy-duty components (valve springs, retainers, locks, guideplates, studs, and seals)
  • Great for hydraulic roller or large flat tappet street cams
  • Same head as featured on BluePrint's exclusive 383 Roller Crate Engine
  • Backed by a full 12-month limited warranty
• 282-122122 COMP Cams CL12-212-2 S/B Chevy Magnum Cam & Lifter Kit, 2000-6000 RPM
  • Great for street machines
  • Needs stall, headers, and gears
  • Rough idle
  • 280H Grind, 2000-6000 RPM Range
• 915-8002 Speedway SBC Small Block Chevy V8 Cylinder Head Bolt Set
  • Stock length
  • Grade 8 Cylinder head bolts with a 5/8" hex head
• 910-11465-PLN Speedway Small Block Chevy Hi-Rise Intake Manifold, Plain Finish
  • 180° street manifold designed to be used with Holley, Carter AFB or Edelbrock square flange carbs
  • Power range is 1500-6500 RPM
  • Larger-than-stock plenum and runners complements other upgrades
  • Supports larger engines & enhances RPM potential
  • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
• 910-10206 Speedway Small Block Chevy Intake Gasket Set, 1204 Style, Standard
  • Speedway high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines
  • No end seals - use silicone gasket maker
  • Heat crossover port is blocked
  • Compare to Fel-Pro
• 550-955G Mr Gasket 955G Intake Manifold Bolt Kit, 3/8-16 x 1 Inch
  • Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds
  • 3/8-16 x 1"
  • Zinc Plated
  • Grade 5 Quality Steel
• 910-17001 Speedway Small Block Chevy Steel Core Valve Cover Gaskets, Pre-1986
  • Stainless steel core improves seal and won't tear or collapse
  • Reusable
  • .175" thick
  • Fits 1960-86 small block Chevy style heads (4 perimeter bolts)
• 910-10204 Speedway Small Block Chevy 283-350 Head Gaskets, 4.0 Inch Bore
  • Uses premium materials to ensure a positive seal on any race or street engine
  • 4.090" is the MAXIMUM bore size

910-8002 Instructions

910-17001 Valve Cover Gasket Cutaway Illustration

Specs

910-8002 Aluminum Heads:

• Intake
  • CFM Port Flow Average @ 28"
    • .100" - 83
    • .200" - 150
    • .300" - 190
    • .400" - 223
    • .500" - 252
    • .600" - 245
• Exhaust
  
  • CFM Port Flow Average @ 28"
    • .100" - 83
    • .200" - 130
    • .300" - 166
    • .400" - 193
    • .500" - 207
    • .600" - 213
• 195cc intake runners
• 75cc exhaust runners
• 2.02” and 1.60” stainless steel valves
• Valves are swirl polished w/ undercut stems
• Ultra street performance 1.437” springs for up to .575” lift
• 115-125 lb seat pressure
• 295-305 lb open pressure
• Chromemoly retainers w/ 7 degree valve locks
• 3?8”screw in studs and guideplates
• Straight plug
• 64cc combustion chamber
• 3-angle valve job
• Chrome nickel valve seats for unleaded fuels
• Viton® fluoroelastomer valve stem seals
• Manganese bronze guides
• Straight Spark Plug Holes Use A .750" Reach Gasket Style Plug
• Perimeter or Center Bolt Valve Cover Bolt Holes
• Accessory Bolt Holes Machined On Ends Of Heads

910-11465-PLN Intake Manifold:

• Dual distributor hold-downs
• Accepts HEI distributor
• No provisions for stock oil fill tube or stock exhaust-heated chokes
• Will not fit under Corvette hood
• Use Fel-Pro 1204-style intake gaskets with 1.23" wide x 1.99" tall port holes
• No adapters included

282-122122 Camshaft:

• 282-122122 Specs

Important Messages:

• Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.