|
#91002909
Speedway Ford Outer Tie Rod End, 11/16-18 RH Thread
65 Reviews
|
6 Questions
- Replace those sloppy worn out tie rods with our new replacements, 7 degree Ford taper fits many applications
- Not for use with flat steering arms, use only with Ford type steering arms with a tapered hole
- 11/16"-18 RH threads with 2-1/8" thread length, add a new jam nut sold separately with pt# 91001249
See More
$14.99
each
In Stock
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Ends Tie Rod Component, Outer Position, Natural
- Replace those sloppy worn out tie rods with our new replacements, 7 degree Ford taper fits many applications
- Not for use with flat steering arms, use only with Ford type steering arms with a tapered hole
- 11/16"-18 RH threads with 2-1/8" thread length, add a new jam nut sold separately with pt# 91001249
- 1/2"-20 thread on stud with 1-3/4" thread length, shank length is 2.42" and 0.62" O.D. at top of taper, 0.579" at bottom
- Natural steel finish and includes castle nut and cotter pin
See more details
Key Specs
| MFG. Part # | 91002909 |
| Brand | Speedway Motors |
| Position | Outer |
| Tie Rod Style | Straight |
See more specs
Need To Know
Free Shipping on Orders Over $149
Shipping Policies & FAQsNeed help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91002909 Details
Speedway Motors 91002909 Details
Replace those sloppy worn out tie rods with our new replacements. Original equipment on 1948-1964 Ford half-ton pickups, but these tie rod ends can be used for multiple applications other than Ford trucks. Not for use with flat steering arms. Use only with Ford type steering arms with a tapered hole. Not normally used with Chevy spindles.
Speedway Motors 91002909 Specifications
Speedway Motors 91002909 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91002909 |
| Brand | Speedway Motors |
| Position | Outer |
| Tie Rod Style | Straight |
| GENERAL | |
| Tie Rod Component | Ends |
| Thread Type | RH Male |
| Thread Pitch | 11/16"-18 |
| Degree of Taper | 7 degree |
| Stud Length | 1.75" |
| Shank Length | 2.42" |
| Material Type | Steel |
| Finish | Natural |
| Top of Taper | 0.58" |
| Bottom of Taper | 0.62" |
| Thread Length | 2.13" |
| Thread Pitch (2) | 1/2" |
| Sold in Quantity | Each |
| Notes | 1" from center of threaded shaft to the bottom of the taper. Includes boot, castle nut, and cotter pin. |