Speedway Early Ford Spindle/Bendix Drum Brake Kit
- Fits 1937-'48 Ford cars or 1937-'47 Ford half-ton pickups with original style rear axle
- 12" x 2" brake drums (910-65400) with 5" x 5-1/2" bolt pattern
- Kit comes complete with complete with shoes, wheel cylinders, and hardware
- 1928-1948 Ford Milled Forged Spindles also included
- Will accept 1928-1948 Ford Milled Forged Spindles
Build Your Kit
You're almost there! This kit has an option or two for you to select. Let us know which options you want for your new kit.Details
Info
If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders, and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.
This brake assembly comes complete with our new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.
Also included is our Speedway 1928-1948 Ford Milled Forged Spindles which have been machined to accept our Bendix Style brake kits without the typical required modifications. These Speedway spindles are one-piece, drop-forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the 37-41 round-back passenger car design and use 37-41 Ford king pins. These spindles fit Ford axles from 28-48 passenger car. They can be used with period-correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from 28-36. Ford-style spindles are generally your best choice when using an original Ford axle or an aftermarket I-beam axle. These spindles are a reproduction version of the 1937-41 spindle. Ford used the same king pin dimensions and geometry on the 1928-48 axles, therefore you can use any 1937-48 Ford spindle on any 1928-48 car axle.
Be sure to include our spindle nut kit (910-616004), early ford hubs (91065450) and bearing kit (91065455) to complete installation.
Kit includes:
- 916-32111 Speedway 1928-1948 Ford Milled Forged Spindles
- 910-65420 Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
- 917-4900 Brake Hose for Early Ford Style Wheel Cylinders, 7/16 Inch Ends
- 702-4475-2 Bolt Kit for Ford Spindles/Steering Arms/Brake Brackets
- 910-65400 12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
Notes
Additional Information:
- 916-32111 Speedway 1928-1948 Ford Milled Forged Spindles
- Drop forged
- Constructed of high strength 4140 steel
- Stock height
- Modeled after 37-41 round-back passenger car design
- Uses 1937-1941 king pin kit
- For Ford axles 1928-1948 passenger car
- King pins not included
- Will not work with 1928-1936 Hubs
- 910-65420 Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
- Wheel cylinder inlet 7/16"-20 straight thread NOT 7/16"-20 IFF (correctly threaded hoses are included in kit)
- Inlet fitting will require a sealing washer or O-ring style fitting
- Bolt Pattern: 3-3/8" center-to-center both horizontally and vertically
- Our flat plate steering arms WILL NOT fit this backing plate
- Includes backing plates, shoes, hardware, and wheel cylinders
- 917-4900 Brake Hose for Early Ford Style Wheel Cylinders, 7/16 Inch Ends
- Designed for use on early Ford style wheel cylinders
- Constructed of strong rubber for a flexible yet durable fit
- Crush washers NOT included
- 7/16"-20 O-ring male thread for wheel cylinder end
- 7/16"-24 IFF to accept a 1/4" brake line
- External 5/8" threads on line to utilize a jam nut such as 175-0246 for brake line tab attachment
- Use 910-3183-7/16 adapter fitting to utilize hose with 3/16" brake line
- 17 3/4" long end to end
- 702-4475-2 Bolt Kit for Ford Spindles/Steering Arms/Brake Brackets
- (8) 1/2"-20 x 1-1/4" fine thread button head allen bolts
- (8) Thin nylock nuts
- (1) Instruction sheet
- 910-65400 12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
- Friction surface goes all the way to the edge
- Surface is chamfered but the shoe surface is to the edge
- Hub I.D. is 3.25"
- Mounting face is 7.88"
- O.D. Drop from face is 1.40"
Important Messages
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
What's In The Kit
-
Speedway 1928-1948 Ford Milled Forged SpindlesPart # 91632111Qty x 1
-
Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 InchPart # 91065420Qty x 1
-
Brake Hose for Early Ford Style Wheel Cylinders, 7/16 Inch EndsPart # 9174900Qty x 2
-
Bolt Kit for Ford Spindles/Steering Arms/Brake BracketsPart # 7024475-2Qty x 1
-
12 x 2 Brake Drum for Bendix Style 1937-48 Ford BrakesPart # 91065400Qty x 2
More Like This
-
Speedway Early Ford Spindle and Finned Buick Drum Brake Kit$1,549.99 -
Aluminum Buick Front Brake Drum Kit, 12x2, 45-Fin, Plates/Hubs$1,349.99
-
Currie 96227 9 Inch Ford 11 x 2-1/4 Drum Brake Kit, 5 on 4.5/4.75 BP$617.50
-
Ford 9 Inch Drum Brake Kit, Big Ford New Style, 4.5x5/4.75x5 BP$375.99
-
Currie 96237 11 Inch Replacement Brake Drum for 9 Inch Ford 9-Plu$199.99
Reviews
Q & A
-
Tim talks about the options we have for early Ford drum brakes.
-
Tim talks about the difference between juice brakes and self-energizing brakes.
-
You can slip these Finned Aluminum Buick Brake Drums on to any one of our 1937-48 Ford hubs or 12x2 Bendix brakes. No machining. No re-drilling. Not a cover. Just classic hotrod style.
-
Finned Aluminum "Buick Style" Brake Drums are a great way to add that vintage hot rod style to your Early Ford. Follow along as we install a pair on our '32 Roadster and add some serious hot rod attitude!
-
Learn how to assemble one of our bolt on nine-inch Ford disc brake kits in this step-by-step guide.