|
#80292420
GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 6 Inch
- This 6" slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed
- Fits the common GM 1-3/16" x 27 splined output shafts found on GM 3 and 4 speed manual, TH350, Powerglide, 700R4, 4L60, and 200-4R transmissions
$108.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 1310 Yoke U-Joint Series
- This 6" slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed
- Fits the common GM 1-3/16" x 27 splined output shafts found on GM 3 and 4 speed manual, TH350, Powerglide, 700R4, 4L60, and 200-4R transmissions
- Longer than stock length has 4 3/8" of slip length - note stock transmissions will need the output shaft modified in order for the entire slip length to be inserted
- Also fits Bert, Brinn, and Falcon transmissions
- Uses 1310 U-joint with external snap rings which is very common, and easy to find conversion U-joints if needed
Key Specs
| MFG. Part # | 80292420 |
| Yoke U-Joint Series | 1310 |
| Spline Count | 27 |
| Overall Length | 6.75" |
| Shaft Diameter | 1.50" |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 80292420 Details
Speedway Motors 80292420 Details
As featured on Classic Truck’s Week to Wicked. Watch the transformation here!
Longer slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed. Works with 1310 series U-joints.
Fits over the output shaft of the following transmissions:
- Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft
- Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions
- Muncie M20/M21 and Borg Warner T-5 & T-56 27-spline manual transmissions
Item Details
For 3-7/32" x 1-1/16" U-jointsApplication
GM apps:
( T350 ) - GM 27-spline, 1.5" OD Seal Dia., Fits Late Power Glide, Turbo 200, Turbo 350, 700R4, 4L60, 4L65, 4L70, Muncie, Saginaw, Borg Warner Trans
Speedway Motors 80292420 Specifications
Speedway Motors 80292420 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 80292420 |
| Brand | Speedway Motors |
| Yoke U-Joint Series | 1310 |
| Spline Count | 27 |
| Overall Length | 6.75" |
| Shaft Diameter | 1.50" |
| Spline End | 1-3/16" |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Notes | Accepts a 3-7/32" x 1-1/16" U-joint and is grooved for an "external" U-joint cap retaining clip. |
| Shaft Length | 4.38" |
| Sold in Quantity | Each |
Ratings & Reviews
4.9
20 Reviews
Customers appreciate the product for its perfect functionality and high-quality materials. The product's practicality was praised, including its excellent fit for various applications. Notably, customers commended the precision of the machining and strength of the casting, demonstrating exceptional quality. The product also proves its versatility by solving specific issues, such as short driveshaft problems or compensating for a motor being moved forward. Further, customers appreciated the reasonable price for such a reputable part, pointing out its superior value compared to competitors. Several customers reaffirmed they would repurchase the product if needed due to its proven performance and reliability.
Ratings & Reviews
4.9
20 Reviews
Customers appreciate the product for its perfect functionality and high-quality materials. The product's practicality was praised, including its excellent fit for various applications. Notably, customers commended the precision of the machining and strength of the casting, demonstrating exceptional quality. The product also proves its versatility by solving specific issues, such as short driveshaft problems or compensating for a motor being moved forward. Further, customers appreciated the reasonable price for such a reputable part, pointing out its superior value compared to competitors. Several customers reaffirmed they would repurchase the product if needed due to its proven performance and reliability.
4.8
20 reviews
5
18
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Good quality looking yolk !
Yolk looked like a good quality made part, had no rough edges and no dress up needed.
Most Liked Negative Review
3.0
I would by this product again
Had to tap it in the splines were a little tight but she works good.
Filter by Ratings
I would buy again
5.0
6 months ago
Paul T
Palm Coast, FL
Verified
Perfect fit
Would Recommend
I would buy again
5.0
a year ago
Op2mstik1
Queen Creek, Arizona
Verified
Works as it should.
Would Recommend
Did what it's supposed to do.
5.0
a year ago
Tim
Canada
Verified
Pretty basic. It's a GM slip yoke. This is to replace the five and a half inch one I bought previously that would not go into the transmission. This one slid in nice and smooth just like it's supposed to.
Would Recommend
Worked great would purchase agsin
5.0
2 years ago
Buddy
Fredonia az
Verified
Worked great in my hot rod
Would Recommend
I would buy this product again. But I would not exchange it
5.0
2 years ago
Ike
Slidell la
Great product. It's obviously really good quality. I wasn't too happy that I ordered the wrong size by accident. I returned it to purchase e the correct size and I was charged a $10 label fee 👎🏽 even though I was spending more money on a different part.
It works perfectly
5.0
3 years ago
Chris
Palouse WA
Verified
It slides onto the splined shaft and holds a U-joint.
Would Recommend
yes
5.0
4 years ago
lucky dave
hunt texas
Verified
worked great ,just what I've learned to except from speedway
I would by this product again
3.0
6 years ago
40 Deluxe
Lusk Wyoming
Verified
Had to tap it in the splines were a little tight but she works good.
Would Recommend
Just what I needed to replace my old rusty one
4.0
6 years ago
Vince
San antonio
Verified
Had to remove the packing grease on the outside and in the splines
Would Recommend
Great price excellent parts
5.0
7 years ago
Shortdog
Livingston La
Verified
Ordered my drive shaft yoke and came in right away and fit perfectly & quality part
Would Recommend
Showing 10 of 20 reviews
Questions & Answers
Questions & Answers
6 Questions • 7 Answers
I have gm automatic out of a truck the yoke is bolted to tail end of transmission the driveshaft was a 2 piece that had slip joint . My question is there a slip joint yoke I can convert to so I can use a one piece driveshaft ? I'm putting motor and transmission in a street rod
by Rudy
• 7 years ago
2 answers
View Answers
Header says 6 in description says 6.75. Which is it. I need a 6 in from center of cap to end.
by Larry
• 9 years ago
1 answer
View Answer
Will this fit Falcon Transmissions. Is it hardened?
by Kyleo
• 11 years ago
1 answer
View Answer
I recently purchased this product to connect to a 200r transmission. The slip yoke is too small, and also has a key way in it, although it's a 27 spline it doesn't connect to my transmission. I've never seen an auto slip yoke with a key way, is this appli
by Woody
• 15 years ago
1 answer
View Answer
will this fit a bert transmission
by buck
• 15 years ago
1 answer
View Answer
i need a yoke for th400,will this fit
by garry
• 15 years ago
1 answer
View Answer
6 of 6 questions shown