|
#3251905
$445.95
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 4-Barrel Carburetor Barrels, 650 CFM CFM
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | Manual |
| CFM Range | 600-699 CFM |
| CFM | 650 CFM |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyEdelbrock is introducing their new AVS2 carbs to their already well renowned line of carburetors. This carburetor features annular flow primary boosters to improve off idle and cruising performance. The annular flow helps eliminate any flat spots that may happen when the carburetor transitions from idle to full throttle. With the improvements that Edelbrock has made to these carburetors, they are ideal for a wide variety of small block and big block engines. This 650 CFM carburetor has a square flange that allows it to be fitted to many different intake manifolds. It comes with: Metering Jets - Primary .101, Secondary .098; Metering Rods - .070 x .037; Step-Up Spring - orange (5" Hg).
Charts
Guides & Documents
For race/ off road use or for use on pre-1966 vehicles.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 1905 |
| Brand | Edelbrock |
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | Manual |
| CFM Range | 600-699 CFM |
| CFM | 650 CFM |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Finish | Satin |
| Material Type | Aluminum |
| Color | Silver |
| Secondary Type | Mechanical |
| Fuel Inlet Type | Single |
| Gasket(s) Included | Yes |
| New or Remanufactured | New |
| Throttle Linkage Type | Universal |
| Supercharged Application | No |
| GENERAL | |
| Booster | Annular |
| Bolt Hole Pattern | 5.160" x 5.625" |
| Primary Jet Size | 101 |
| Secondary Jet Size | 98 |
| GTIN Code | 085347019052 |
| Sold in Quantity | Each |
5
26 Reviews
Customers unanimously commend the product for its ease of installation, good fit, and immediate performance enhancement. The Edelbrock AVS2 Carburetor is highly regarded for its power and responsiveness, easily surpassing the results of previous carbs used by various customers. Many appreciate the smooth operation right out of the box, needing virtually no adjustments. The carb's top-notch material quality manifests in the form of increased mid-range power and responsiveness. The product also stands out in terms of practicality, with some reviews mentioning its compatibility with various engines including a hopped-up 302 Ford, and Chevy 350. Users highly recommend the Edelbrock AVS2 Carburetor and would willingly repurchase, reflecting high customer satisfaction. Its ability to handle different gases and its effectiveness on a variety of vehicles sets it apart from competitors.
5
26 reviews
5
25
4
1
3
0
2
0
1
0
Filter by Ratings
The AVS2 is a great Carburetor.
5.0
8 months ago
Colorodo
Lynden
Verified
Replaced the 750 on my SBC engine. Swapped it out set the idle and it runs great. Added a Edelbrock choke cable .
Would Recommend
I have bought 3 of these
5.0
11 months ago
Hardcore hotrodder
California
Verified
Omg best carburetor ever! Have bought 3 for different customs and race cars. Replaced an original Carter carb with it too Beats Holley hands down in my experience. This carb is highly dependable for performance . Good construction Easy to service if needed. I have recommended it to friends who also buy them. My rating is 25,000 stars.
Would Recommend
Yes
5.0
11 months ago
Old car guy
Ky
Verified
Been using Edelbrock carbs for decades. Easy to work with and hold a tune very well
Would Recommend
i would buy another if needed
5.0
2 years ago
diesel dave
haverhill mass
Verified
I used the carb to replace an older one that wasn't working and giving poor performance . it was about a 10 minute installation engine runs great much better idle .
Would Recommend
yes , I would buy this again
5.0
3 years ago
pappy
pa
Verified
easy install, minimal adjustment . completely satisfied solved 90% of my problems
Would Recommend
I am in love with this carb!
5.0
4 years ago
Red Devil
Kansas City, Mo.
Verified
I had replaced the Crossfire FI in my 84 Corvette with a Edelbrock 1405. Ethanol gas killed that carb, and filled it with jelly & corroded it. I ordered this AVS2 from Speedway, along with a couple air cleaners and fuel filters. After draining the tank, and flushing the line, I installed a clean fuel filter, and installed this carb. I put 10 gallons of Premium non-ethanol gas in the tank, and fired it up. Not only did it run, but it ran better than that 1405 ever did. My engine is a real beast now! I still have not adjusted the carb.
Would Recommend
Haven't put it on yet. Still finishing body work
5.0
4 years ago
Dave
Greeley Kansas
Verified
Haven't put it on yet. Still finishing body work
The AVS2 is a very good all around carb
5.0
4 years ago
Mike
Helena Montana
Verified
Bolted rite on a hopped up 302 Ford and is just as happy as can be.
Would Recommend
always use edelbrock carb
5.0
5 years ago
mike
cny
Verified
used on 350 chevy great performance
Would Recommend
WORKS PERFECT
5.0
5 years ago
DANNY AGZRA
PHARR TX
Verified
STARTED ON FIRST CRANK
Showing 10 of 26 reviews
6 Questions • 6 Answers
Can an electric choke kit be added on this carb?
by Chad
• 2 years ago
1 answer
View Answer
Would this be good for a mild built 400 sbc
by Hobbystock22x
• 7 years ago
1 answer
View Answer
I have a 71 torino with a 351c does this carb have a link for my kick down rod??
by Iceman
• 7 years ago
1 answer
View Answer
Does this have a vacuume or machanical secondary?
by Ervin
• 7 years ago
1 answer
View Answer
would this work on a Pontiac 350 bored 30 over RV cam or would a 600 cfm be better
by jay
• 7 years ago
1 answer
View Answer
Will this work on an 86 F-250 with the 7.5L at higher elevations?
by Porckchop
• 8 years ago
1 answer
View Answer
6 of 6 questions shown
