Product Summary

LS3, Long Block Crate Engine Type, 473 ft./lbs. Torque

  • The LS3 delivers a stunning 495 horsepower and 473 lb.-ft. of torque. That's nearly 14 percent more power and torque.
  • The key to the power boost is the Hot Cam's 0.525-inch lift on both the intake and exhaust sides
  • 219-degree/228-degree duration specs.
  • That's less lift on the intake side than the stock LS3 cam, but considerably more duration, allowing the valves to stay open longer to draw in more air from the rectangular-port L92-style heads.
See more details

Key Specs

Crate Engine TypeLong Block
Compression Ratio10.7:1
Engine Displacement376 cu. in.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
See more specs

Need To Know

Truck Shipment

Truck shipments must be pre-paid with a credit card, certified check or money order

Quick and Easy Returns

Return Policy

Chevrolet Performance Parts 19432416 Details

An LS3 with a hot cam

Chevrolet Performance engineers took a production LS3 6.2L (376 cubic inches) and swapped the stock camshaft for the racing-inspired LS Hot Cam.

Hot Performance

  • The LS3 delivers a stunning 495 horsepower and 473 lb.-ft. of torque. That's nearly 14 percent more power and torque.
  • The key to the power boost is the Hot Cam's 0.525-inch lift on both the intake and exhaust sides
  • 219-degree/228-degree duration specs.
  • That's less lift on the intake side than the stock LS3 cam, but considerably more duration, allowing the valves to stay open longer to draw in more air from the rectangular-port L92-style heads.

Charts

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Chevrolet Performance Parts 19432416 Specifications

KEY SPECS
MFG. Part #19432416
BrandChevrolet Performance Parts
Crate Engine TypeLong Block
Compression Ratio10.7:1
Engine Displacement376 cu. in.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
Piston MaterialHypereutectic Aluminum
Crankshaft MaterialNodular Iron
Carburetor IncludedNo
Intake Manifold IncludedYes
Distributor IncludedNo
Connecting Rod MaterialPowdered Metal
Valve Covers IncludedYes
Engine BalanceInternal
Cylinder Heads IncludedYes
Rear Main Seal Style1-piece
Throttle Body IncludedYes
Timing Cover IncludedYes
Oil Pan IncludedYes
Water Pump IncludedYes
Harmonic Balancer IncludedYes
Flexplate IncludedNo
Flywheel IncludedNo
Air Cleaner IncludedNo
Spark Plugs IncludedYes
Spark Plug Wires IncludedYes
Computer IncludedNo
Wiring Harness IncludedNo
Recommended FuelPremium
Spark Plug StyleStock
GENERAL
Torque473 ft./lbs.
Horsepower495 horsepower
Maximum RPM6,600
Combustion Chamber Volume68cc
Camshaft Duration (.050 in)219° intake / 228° exhaust
Camshaft Lift (in).525 intake / .525 exhaust
Bore x Stroke (in)4.060" x 3.620"
Warranty2 year / 50,000 mile
AssembledYes
Cylinder Head StyleAssembled
Intake Valves IncludedYes
Intake Valve Diameter2.165"
Exhaust Valves IncludedYes
Exhaust Valve Diameter1.59"
Camshaft IncludedYes
Cylinder HeadsAluminum L92/LS3 style ports
Rocker ArmsInvestment-cast, roller trunnion
Rocker Arm Ratio1.7:1
BlockCast-aluminum with six-bolt, cross-bolted main caps
Sold in QuantityEach

Questions & Answers

1 Question • 1 Answer

Does it come with everything in picture? Like intake , fuel rails and injectors

by Rich

• 4 years ago

1 answer

1 of 1 questions shown

Fitment

  • GM LS3

  • GM LS3

  • GM LS3

  • GM LS3

Customer Impersonation Script