Product Summary

302, 327, 347, 351W, 396, 5.0L, Aluminum, Natural

    Key Specs

    Cylinder Head StyleAssembled
    Material TypeAluminum
    Combustion Chamber Volume60cc
    Intake Runner Volume190cc

    Need To Know

    This Product Will Ship Free

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy


    Get big power on a small budget with BluePrint Muscle Series cylinder heads! These lightweight aluminum heads bolt up to your small block Ford and feature 190cc intake/65cc exhaust runners, 60cc combustion chambers, and 2.02" intake/1.60" exhaust valves.

    • Maximum output for less money!
    • Designed and produced by BluePrint Engines
    • Fully assembled with heavy duty components
    • Backed by our full 12-month limited warranty
    • Pedestal Mount

    CARB Warning

    Follow EPA, CARB, and state regulations for engine changes

    Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine


    MFG. Part #HP9008
    BrandBluePrint Engines
    Cylinder Head StyleAssembled
    Material TypeAluminum
    Combustion Chamber Volume60cc
    Intake Runner Volume190cc
    Exhaust Runner Volume65cc
    Combustion Chamber Volume Range60cc - 69cc
    Intake Runner Volume Range190cc - 199cc
    Exhaust Runner Volume Range60cc - 69cc
    CNC-Machined RunnersNo
    CNC-Machined Combustion ChamberNo
    Intake Port LocationStandard
    Exhaust Port ShapeSquare
    Exhaust Port LocationStandard
    Intake Valve Diameter2.020"
    Intake Valves IncludedYes
    Exhaust Valve Diameter1.600"
    Exhaust Valves IncludedYes
    Valve Spring IncludedYes
    Spring Diameter1.440"
    Damper Spring IncludedYes
    Number of Springs Per ValveDual
    Maximum Lift0.575"
    Machined for O-RingNo
    Valve Seat Machine Style5-Angle
    Valve Seats MachinedYes
    Valve Seat MaterialChrome Nickel
    Valve Stem Seals IncludedYes
    Valve Guides IncludedNo
    Valve Guide MaterialManganese Bronze
    Locks IncludedYes
    Lock Style7 Degree
    Retainers IncludedYes
    Retainer MaterialChromoly Steel
    Guideplates IncludedNo
    Rocker Arms IncludedNo
    Rocker Arm Studs IncludedNo
    Rocker Arm Nuts IncludedNo
    Oiling StyleThrough Pushrod
    Heat CrossoverNo
    Steam Holes DrilledNo
    Accessory Bolt Holes DrilledYes
    NotesPedestal mount
    Sold in QuantityEach