Bassett DOT Approved 15 Inch Racing Wheels - 15x7, 5 on 4-3/4

3.625" Backspace wheels are clearance priced. 

If you're an IMCA hobby stock or street stock racer, Bassett's DOT-approved, 5 on 4-3/4 bolt pattern, 15 inch racing wheels are for you. They feature the same quality construction and high strength of our Sprint Cup/Nationwide/Camping World Truck Series certified wheel. Bassett DOT 15 inch wheels are also the lightest on the market.

Since the wheels conform to the DOT specifications, they are legal for the street! When outfitting your car or truck with custom wheels, don't settle for lower quality knock-offs. Bassett Racing Wheels are race track tough.

Available in a 5 on 4-3/4" bolt circle pattern with a 3" and 3-5/8" backspace. Black finish.

Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

For offroad use only. The following must be considered when using Bassett wheels for on highway/street use when the wheel/tire assembly is being balanced. Bassett wheels are lug centric, which means they are built off of, and must be balanced using, the bolt circle and NOT the wheel center hole. Improper use of a tire balancer that centers the wheel on the hub bore, not the bolt circle, will result in an incorrect reading for rim runout as the center hole is not in the perfect center of the bolt pattern. The only machine capable of performing a lug centric balance is the Hunter GSP 9700 with the flange plate bolt circle adapter and no centering cone.

For offroad use only. The following must be considered when using Bassett wheels for on highway/street use when the wheel/tire assembly is being balanced. Bassett wheels are lug centric, which means they are built off of, and must be balanced using, the bolt circle and NOT the wheel center hole. Improper use of a tire balancer that centers the wheel on the hub bore, not the bolt circle, will result in an incorrect reading for rim runout as the center hole is not in the perfect center of the bolt pattern. The only machine capable of performing a lug centric balance is the Hunter GSP 9700 with the flange plate bolt circle adapter and no centering cone.

Hub bore diameter is 3 3/8