Packard Street Control Arm Bushings

Learn how replace lower and upper rear control arms. Read up on racer Steve's A-body control arm replacement and the bushings included kit he recommends.

Speedway Motors employee Steve upgraded the trailing arms on his 1976 Chevrolet Laguna with some spherical bushings.

Choosing the right suspension products when building your street rod or custom car. A step by step on how to determine which parts are needed for installation, how to calculate the spring rate and other helpful tips along the way.

Looking for a cost effective way to upgrade the front of your car? This article shows the steps to replace upper and lower stock control arms with tubular control arms for added suspension strength.

Save some weight by swapping in some upgraded control arms! Employee Steve L. reviews the 1970-81 Camaro Upper Control Arm.

Have a 1970-1994 GM A- or X-body in need of some new lower control arms? Take a look at what Speedway Motors' employee Steve L. has to say about our lower control arms!

In this Tech Tip, John responds to a customer question about tubular control arms.

Learn how to fabricate stamped steel boxed control A arms . This process increases the rigidity of control arms while also reducing flex for peak performance.

Speedway Motors was selected by Arrow Electronics to prepare Sam Schmidt’s vehicles for Optima’s Ultimate Street Car Challenge where he will race for the first time since becoming a quadriplegic in 2000.

Not sure what the difference is between your old paint gun and the new ones you see today? Click here to find out!