|
#91034005
Replacement Bushings for Mustang II Upper Control Arms
- Replacement bushings for our tubular, MII upper control arms
- Bushings are constructed of quality rubber for durability
- Overall Length: 1.66"
$14.49
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Rubber Bushing Material, Steel
- Replacement bushings for our tubular, MII upper control arms
- Bushings are constructed of quality rubber for durability
- Overall Length: 1.66"
- Inside Diameter: .65"
- Outside Diameter: 1.20"
Key Specs
| MFG. Part # | 91034005 |
| Bushing Material | Rubber |
| Overall Length | 1.66" |
| Inside Diameter | .65" |
| Material Type | Steel |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91034005 Details
Speedway Motors 91034005 Details
These are replacement bushings for our tubular, MII upper control arms (#s 910-35320 / 910-34320 / 910-35326). Bushings are constructed of quality rubber for durability.
- Overall Length: 1.66"
- Inside Diameter: .65"
- Outside Diameter: 1.20"
- Sold as pair
Speedway Motors 91034005 Specifications
Speedway Motors 91034005 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034005 |
| Brand | Speedway Motors |
| Bushing Material | Rubber |
| Overall Length | 1.66" |
| Inside Diameter | .65" |
| Material Type | Steel |
| GENERAL | |
| Outside Diameter | 1.20" |
| Sold in Quantity | Pair |
Ratings & Reviews
5
10 Reviews
Customers found the bushings to be high-quality, outperforming original equipment in certain situations, evident from their use in various car models including the 1965 Falcon and Mustang II. Praised for their excellent fit, superior noise reduction capabilities, and overall better performance than alternatives like poly bushings, users reported a smoother ride after installation. The bushings' practicality was accentuated by their ability to easily replace previous parts, even after processes like powder coating. Consequently, they were often recommended over competitors for ensuring car ride comfort and effective suspension.
Ratings & Reviews
5
10 Reviews
Customers found the bushings to be high-quality, outperforming original equipment in certain situations, evident from their use in various car models including the 1965 Falcon and Mustang II. Praised for their excellent fit, superior noise reduction capabilities, and overall better performance than alternatives like poly bushings, users reported a smoother ride after installation. The bushings' practicality was accentuated by their ability to easily replace previous parts, even after processes like powder coating. Consequently, they were often recommended over competitors for ensuring car ride comfort and effective suspension.
5
10 reviews
5
10
4
0
3
0
2
0
1
0
Filter by Ratings
Mustang II a arm bushings.
5.0
2 months ago
LMc
Rowlett, Tx
Verified
Bushings were exact replacements.
Would Recommend
Didn't use them. But I will definately save for later!
5.0
2 years ago
EZ
San Antonio, Texas
Verified
Don't know what else to say. The bushings are very well made. Probably better than the ones that came with the control arms.
Would Recommend
They work perfectly!
5.0
2 years ago
Jean
Cultus Lake, B.C. Canada
Verified
I used these bushings on my 1965 Falcon / Heidt's front suspension . I replaced the original noisy poly urethane bushings with these. The only thing to remember is that the control arm nuts MUST be tightened
Would Recommend
Worked out good
5.0
4 years ago
Bob
Lafayette MN
Verified
Worked good for my car
Would Recommend
Bushings replace
5.0
4 years ago
Ed
Deltona Florida
Verified
Work pretty good.Excellent
Would Recommend
Good product
5.0
5 years ago
Hardworkinman
Portland Oregon
Verified
Used on my mustang ll upper control arms
Would Recommend
So much better than poly bushings
5.0
5 years ago
fordomatic
Lindell Beach B.C Canada
Verified
I installed a Heidt's Mustang II front end in my 65 Falcon and have been suffering with a noisy front suspension ever since. I pulled the entire suspension apart and lubed it with the supposed correct lube an although it stopped the noise for a bit ,the noise came back. I fitted the replacement stock type bushings in their place and the noise is gone and the car rides better!
Would Recommend
Product fit as per intended use.
5.0
5 years ago
Donald J.
Gardnerville, Nv.
Verified
In spite of USPS delivery delays parts finally arrived and installed as intended.
Would Recommend
Great Product
5.0
6 years ago
Rick
New Braunfels, Tx
Verified
Replaced bushings after powder coating upper arms. Came out great!
Would Recommend
Arrive quickly and fit perfect !!!!
5.0
6 years ago
40chev
Farmington, mo
Verified
Just what I needed to get my mustang ii suspension ready for fall cruzin
Showing 10 of 10 reviews
Questions & Answers
Questions & Answers
3 Questions • 5 Answers
Do you sell a polyurethane version of these? Thanks, Russ
by Russ
• 7 years ago
2 answers
View Answers
The OD of this bushing is I.20", what should my control arm measurement be to have a force fit?
by carnutbill
• 8 years ago
2 answers
View Answers
Can these fit other MII tubular control arms? The bushings on my mustang II tubular control arms are worn out and need to be replaced. I originally used a Fatman Fabrication stock mustang ii front sub-frame w/ the tubular upper and strut-less lower control arms. Now after 17 year the bushings have gone bad. I asked a local hot rod shop if I could just replace the bushings and everyone has said I have to replace the entire control arm. These are the first replacement bushings I have found for a mustang ii tubular control arm. So my question to you is are these a fairly standard size so they could fit my set up or are not all mustang ii tubular control arms built to the same dimensions?
by NiKustoms
• 11 years ago
1 answer
View Answer
3 of 3 questions shown