GMC K1000 Fasteners and Hardware Parts

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

Piston rings may not be the most exciting part of an engine build, but knowing how to clock piston rings and how to install rings on a piston is critical to your engine performing properly.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

Hose & Fitting

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.

Learn what throttle and kickdown cables do, how to install them, and tips for troubleshooting issues like broken or stuck cables.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

Check out a couple of tips on how to install a new clutch.

In this Tech Tip, John shares some tips with a customer about adjusting a steering box he got from us recently.