GMC 253-22 Fasteners and Hardware Parts

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

This Chevelle project gets rewired with a Speedway Motors 22 Circuit wiring kit. Follow along as Jeff guides you through this application, starting with a good mounting location for the fuse box. Learn more on continuity, grounding and relays.

Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!

Sending your straight axle street rod to the alignment shop can be expensive, but if you have the right tools you can do it yourself in your own garage.

Speedway Motors employee Tim M. decided to take us along as he takes another step in restoring a '32 Ford. This go-round he repairs an original '32 grille insert to put in his new shell.

Hose & Fitting

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.