GMC 1000 Series Chassis and Suspension Parts

In Episode 3 of our C10 build, we install a front suspension kit and finally have a rolling chassis!

Follow along as we give our C10 truck project a much needed dose of suspension travel with a bolt-on C-notch kit.

In Episode 2 of our '68 C10 build, we rip it apart, clean up 54 years of rust and dirt, and get to work on the rear suspension.

Caster and camber are critical adjustments to your car's suspension alignment. It's important to understand what caster and camber are as well as how they can affect your car's performance.

Watch as we install a front suspension lowering kit on our 1968 Chevy C10. Upgrades include disc brakes with a 5 on 5” bolt circle as well as 2” drop springs and 2 ½” drop spindles.

There's a lot going on with your car's front suspension geometry. This guide covers some of the most important suspension concepts, from caster and camber to toe and Ackerman angle.

This article guides you through the process of repairing and painting a subframe for a 1967 Poncho Firebird. See how the front suspension gets an overhaul including new G-comp spindles and a disc brake kit.

The Baja 1000 is a grueling test of man and machine. Maxima Racing Oil wanted to see how their products fared in 2022 winner Luke McMillin's trophy truck, so they followed along as his 555-inch Chevy was disassembled and inspected...

How to lower a C10 Chevy truck with lowering coil springs and install a front end rebuild kit. Upgrade your broken, rusty, or saggy suspension with our guide.

Race car ballast can have a significant impact on your car's performance and handling. Here are some notes and tips to help you to correctly place ballast in your car.