Front Engine Dragster MAP Sensors

In the 1950's and 60's, front engine dragsters were the fastest cars on the track. Then, they disappeared almost overnight. Here's the story of the rise, fall, and rebirth of the slingshot dragster.

Looking to swap the venerable LS engine into your hot rod, muscle car, or classic truck? Take a look at our detailed identification guide for Gen III/IV LS engines before you hit the salvage yard or swap meet!

Click to learn about split wishbone, hairpin radius rod, and four bar suspensions. Learn the history and difference between these solid axle suspension designs.

Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!

Dialing in a suspension setup? Why not use a vehicle mounted camera to record the travel? Click here for some information on the versatility of vehicle mounted cameras and where to mount them!

Learn about performing an LS Swap in a 1972 Chevelle in this tech article. We'll discuss lessons learned from our Chevelle engine swap using a 500-horse 6.0.

We will show you the differences among traditional I-beam and tube axles and suspension designs used on hot rods; the differences between cross and traditional steering, measuring for springs, what spindles to choose, and much more.

Incorporating a Model A rear cross member and a high arc stock spring into a roadster build.

Our hot rod expert takes you through his ford I beam axle setup. Follow as he sets up the front end on his split wishbone front suspension Model A.

This article guides you through the process of repairing and painting a subframe for a 1967 Poncho Firebird. See how the front suspension gets an overhaul including new G-comp spindles and a disc brake kit.