Front Engine Dragster Carburetor Adapter Plates

We look at the basics of performance carburetion and what you need to properly supply your street or race car with enough fuel in this buyer's guide

There's a right and wrong way to run a two-barrel carburetor on your vintage engine. Check out this guide about how to select the correct carburetor for your Flathead or vintage engine.

Learn about performing an LS Swap in a 1972 Chevelle in this tech article. We'll discuss lessons learned from our Chevelle engine swap using a 500-horse 6.0.

LS swaps are nothing new, but they're still a little mysterious to some of us. Here is an overview of what you will need and what you need to know to swap some modern performance into your muscle car, truck, or hot rod!

The LS swap is no doubt still going strong, but if you’re planning to run an automatic behind your 4.8, 5.3, or 6.0L LS-powered ride, you’ll need to pay attention to a few items we discuss in this buyer’s guide.

Determining the correct flexplate for your V8 Mopar-powered project takes a little understanding of how these engines were balanced. Our Mopar flexplate buyer’s guide will help.

Follow this detailed guide on installing a FiTech EFI system in a '67 Chevelle. Learn helpful tips along the way including how to route the blue trigger wire away from the coil and ignition system.

Preventative maintenance is crucial for hot rods. In this article, Jess shows you how to place a front wheel cylinder on an early Ford.

If you are confused as to how that new steering wheel you want is going to attach to your project's steering column then this buyer's guide should be your first visit before adding that new wheel to your shopping list.

Tim M. has tried to stay true to the vintage route, but sometimes, exceptions must be made. For example, the original oiling system's paper element and canister are functional, but an upgraded system will be more reliable.