1980 Chevy K10 Pontiac V8 Header Hardware

Heath P. tells his story on how the passion for 'hot rodding' was instilled in him by his grandfather. From driving tractors on their family farm to becoming a Ford family, you are in for a good read.

GM’s 10-bolt rear axle has been around since the 1960s, here’s how to determine if your junkyard find is worth taking home

Tim talks about the rare V8-60 engine and the parts we have to offer for one.

Read up on GM 10 bolt ring and pinion installation instructions. Follow along as our employee Zach installs a GM 10 bolt rebuild kit from Motive Gear.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

It's alive! Our 1968 C10 truck project is one step closer to our first drive. In this episode, our old truck finally comes to life with a cammed junkyard LS.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

We've come a long way on our '68 C10 project, but we still have a long way to go. Watch as Kevin and Joe discuss where we're at and where we're going.

How to lower a C10 Chevy truck with lowering coil springs and install a front end rebuild kit. Upgrade your broken, rusty, or saggy suspension with our guide.

Now that our '68 C10 cab is straight and rust-free, it's time to bolt on the rest of the sheet metal, get it straight, and get it painted!