1977 Jeep Cherokee Engine Parts

5,142 products fit your

1977 Jeep Cherokee

Add Engine

Show Direct Fit Parts

5,142 products

Sort By:

Clear All

Fitment

1977 Jeep Cherokee

Products

FiTech |

#52138350

FiTech 38350 Fuel Injection System, GM TPI Standalone EFI System

Sold in Quantity:

Each

Transmission Controller Included:

$847.00

/kit

-23%

Tuff Stuff |

#7457651B

Tuff Stuff 7651B Alternator Pulley, 2.628in Pulley, Polished

Finish:

Polished

Sold in Quantity:

Each

$41.99

/each

$54.76

FiTech |

#52160014

FiTech 60014 Handheld Cable (Old Style) For Handheld Controllers

(1)

Sold in Quantity:

Each

$43.00

/each

FiTech |

#52170003

FiTech 70003 Ultimate LS EFI, LS1/LS2, 750 HP, w/o Trans Control

Injection Style:

Multi-port

Injector Size:

55 lbs./hr.

ECM Included:

Yes

$2,107.00

/each

Mr Gasket |

#5509815

Mr Gasket 9815 Oil Filler Cap Plug, Push-In Style

(1)

GTIN Code:

084041098158

Hole Diameter:

1.22"

$12.74

/each

How to Install a Big Block Engine - 1967 Chevelle

Jeff tackles the task of installing a Big Block Engine into his 1967 Chevelle. Read about the hardships he faced and some of the tricks he learned to make this installation run smoothly.

1967 Firebird Engine Refurbish

Follow this restoration guide as Josh breathes new life back into his Pontiac engine.

Historic Chevy Performance Engines

Take a look at a few of the rare and wonderful Chevy engines in the Museum of American Speed!

55 Chevy Engine Build

Derek kicks off his 55 Chevy rebuild with a fresh small block.

Installing a Front Runner Drive System - 1967 Chevelle

Jeff demonstrates how to install the front runner drive system by Vintage Air in his 1967 Chevelle project car all while maintaining a simple, factory fresh look.

'37 Chevy Sedan

Barry's sedan makes us wonder why there aren't more Chevy street rods out there.

Steering Installation - 1967 Chevelle

This article highlights the finishing touches of the front suspension in Jeff's Chevelle. Learn some tips on how to install the steering arms, center link and tie rod assembly.

EFI Fuel Filter Installation - 1967 Chevelle

Jeff walks through how to install an EFI filter for his fuel system. See how to assemble conversion fittings to accurately plumb the fuel lines and tips on fuel line routing.

Lowering a 1967 Chevelle

In this Tech Tip, John offers some suggestions about lowering a 1967 Chevelle.

Replacing Front Control Arms - 1967 Chevelle

Next up is the suspension on Jeff's 1967 Chevelle project. Learn how to properly disassemble and remove components, such as the spindles and brakes. See tips on replacing the control arm bushings and using the right tools to get the job done.

Total Seal |

#718RC00

Total Seal Fixed Size Hard Piston Ring Compressor, Aluminum

(3)

Material Type:

Aluminum

Adjustable:

Finish:

Anodized

$49.33

/each

Proform |

#58667100

Proform 67100C 650-800 CFM Holley Carburetor Main Body

(2)

Carburetor Barrels:

4-Barrel

Fuel Type:

Gasoline

Choke Type:

No Choke

$158.95

/each

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -8 AN

Speedway Motors |

#62010101

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -8 AN

Fitting Hose Size:

-8 AN

Fitting End A:

-8 AN Female

Fitting End B:

-8 AN Hose

$23.99

/each

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black, -12 AN

Speedway Motors |

#62010121

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black, -12 AN

(1)

Fitting Hose Size:

-12 AN

Fitting End A:

-12 AN Female

Fitting End B:

-12 AN Hose

$33.99

/each

Storage -16 AN Flare Fitting Cap, Pack of 4

Speedway Motors |

#54523811

Storage -16 AN Flare Fitting Cap, Pack of 4

Sold in Quantity:

Set

AN Size:

-16 AN

$6.49

/set

Mr Gasket |

#550200104BL

Mr Gasket 200104-BL -4 Straight Push-On Hose Ends, Black

Fitting Hose Size:

-4 AN

Fitting End A:

-4 AN Female

Fitting End B:

-4 AN Hose

$5.08

/each

Vintage Air |

#72515111

Vintage Air 15111VCB Top Mount Compressor Brackets

Material Type:

Mild Steel

Hardware Included:

Yes

Finish:

Natural

$144.99

/each

Vintage Air |

#725151371BCA

Vintage Air 151371-BCA BBC With Long Pump Side-mount Brackets

Fits A/C Compressor Style:

Sanden SD

Water Pump Style:

Long

Mounting Side:

Passenger Side

$144.99

/each

HDPE Sealing Washers for Bulkhead Fittings

Speedway Motors |

#6171097

HDPE Sealing Washers for Bulkhead Fittings

(4)

Gasket Material:

High Density Polyethylene

Sold in Quantity:

Pair

$3.49

/pair

Nickel Straight Flare to Pipe Adapter Fitting, -10 AN to 3/8 Inch NPT

Speedway Motors |

#61770030

Nickel Straight Flare to Pipe Adapter Fitting, -10 AN to 3/8 Inch NPT

(1)

Fitting End A:

-10 AN Male

Fitting End B:

3/8" NPT Male

Angle:

Straight

$18.99

/each

Proform |

#586141146

Proform 141-146 Slant-Edge Alternator, GM 10SI, 100 Amp, Black

One Wire Alternator:

Yes

Alternator Amperage:

100 amp

Alternator Finish:

Matte

$269.95

/each

Proform |

#586141152

Proform 141-152 Slant-Edge Alternator, GM 10SI, 100 Amp, Black

One Wire Alternator:

Yes

Alternator Amperage:

100 amp

Alternator Finish:

Matte

$269.95

/each

-51%

Fragola |

#61770181

Fragola 495108-BL O-Ring -12AN Hose to -10AN Port Fitting

Fitting End A:

-12 AN Male

Fitting End B:

-10 AN Male O-ring

Angle:

Straight

$13.49

/each

$27.78

Goodridge |

#61770261

Goodridge AN921-10DBLK -10 AN to -10 Port Fitting, 90 Degree, Black

Fitting End A:

-10 AN Male

Fitting End B:

-10 AN Male O-ring

Angle:

90 degree

$35.99

/each

Russell |

#6177036

Russell 670360 Fuel Pressure Takeoff Fitting -10 AN Male to Female 1/8

Fitting End A:

-10 AN Female

Fitting End B:

-10 AN Male

Fitting End C:

1/8" NPT Female

$24.95

/each

Male Steel 37 Degree AN Flare Weld Bung Fitting, -4 AN

Speedway Motors |

#6177104

Male Steel 37 Degree AN Flare Weld Bung Fitting, -4 AN

(1)

AN Size:

-4 AN

Thread Type:

RH Male

Fitting Attachment 1:

Male Threads

$5.49

/each

Speedway Motors |

#6176205

Aluminum Allen Pipe Plugs, 3/8 Inch NPT

(5)

Fitting Type:

Plug Fitting

Fitting Size 1:

3/8" Male NPT

Fitting Attachment 1:

Male NPT

$6.99

/pair

Speedway Motors |

#6176206

Aluminum Allen Pipe Plugs, 1/2 Inch NPT

(4)

Fitting Type:

Plug Fitting

Fitting Size 1:

1/2" Male NPT

Fitting Attachment 1:

Male NPT

$9.39

/each

Vintage Air |

#72522400VCQ

Vintage Air 22400-VCQ BBC Proline Water Pump Pulley Double Groove

Groove Count:

Water Pump Style:

Short

Material Type:

Aluminum

$103.99

/each

-29%

Fragola |

#61795231

Fragola 495023-BL 90 Black Press Gauge Fitting 1/8 Fem -4 AN Male

Fitting End A:

-4 AN Male

Fitting End B:

1/8" NPT Female

Angle:

90 degree

$8.19

/each

$11.65

Speedway Full Flow Swivel Hose End Fitting, Straight, Nickel, -8 AN

Speedway Motors |

#62010030

Speedway Full Flow Swivel Hose End Fitting, Straight, Nickel, -8 AN

(1)

Fitting Hose Size:

-8 AN

Fitting End A:

-8 AN Female

Fitting End B:

-8 AN Hose

$17.99

/each

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -6 AN

Speedway Motors |

#62010091

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -6 AN

(9)

Fitting Hose Size:

-6 AN

Fitting End A:

-6 AN Female

Fitting End B:

-6 AN Hose

$20.99

/each

Black 90 Degree -4 AN Flare to 1/4 Inch NPT Pipe Adapter Fitting

Speedway Motors |

#61760811

Black 90 Degree -4 AN Flare to 1/4 Inch NPT Pipe Adapter Fitting

Fitting End A:

-4 AN Male

Fitting End B:

1/4" NPT Male

Angle:

90 degree

$14.99

/each

Speedway 90 -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting

Speedway Motors |

#61760860

Speedway 90 -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting

Fitting End A:

-8 AN Male

Fitting End B:

3/8" NPT Male

Angle:

90 degree

$19.99

/each

45 Degree Flare Adaptor, AN8 to 3/8 Inch NPT

Speedway Motors |

#6176096

45 Degree Flare Adaptor, AN8 to 3/8 Inch NPT

(2)

Fitting End A:

-8 AN Male

Fitting End B:

3/8" NPT Male

Angle:

45 degree

$13.99

/each

-45%

45 Degree Flare Adaptor, AN10 to 1/2 Inch NPT

Speedway Motors |

#6176097

45 Degree Flare Adaptor, AN10 to 1/2 Inch NPT

Fitting End A:

-10 AN Male

Fitting End B:

1/2" NPT Male

Angle:

45 degree

$13.49

/each

$24.89

Aluminum Flare Bulkhead Fitting, 90 Degree, -4 AN

Speedway Motors |

#6176124

Aluminum Flare Bulkhead Fitting, 90 Degree, -4 AN

(1)

AN Size:

-4 AN

Angle:

90 degree

Fitting End A:

-4 AN Male

$10.99

/each

-30%

Fragola |

#61761241

Fragola 483304-BL AN Flare Bulkhead Fitting, -4 AN, 90 Degree

(1)

AN Size:

-4 AN

Angle:

90 degree

Fitting End A:

-4 AN Male

$9.99

/each

$14.39

Speedway Motors |

#6176130

Aluminum Tee Bulkhead Fitting, -3 AN

(1)

AN Size:

-3 AN

Angle:

Tee

Fitting End A:

-3 AN Male

$19.99

/each

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Speedway Motors |

#61761811

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Angle:

Straight

Fitting End A:

-8 AN Male

Fitting End B:

-12 AN Male

$15.99

/each

Speedway Motors |

#6176207

Aluminum Allen Pipe Plugs, 3/4 Inch NPT

(1)

Fitting Type:

Plug Fitting

Fitting Size 1:

3/4" Male NPT

Fitting Attachment 1:

Male NPT

$6.99

/each

Showing 1 - 2376 of 5,142 results

Shop Feedback:

Did you find what you are looking for?

1977 Jeep Cherokee Engine Parts

Subcategory

Part

Brand

Transmission Family

Availability

Engine Family

Discounts

Price

Customer Rating

Products

FiTech 38350 Fuel Injection System, GM TPI Standalone EFI System

Tuff Stuff 7651B Alternator Pulley, 2.628in Pulley, Polished

FiTech 60014 Handheld Cable (Old Style) For Handheld Controllers

FiTech 70003 Ultimate LS EFI, LS1/LS2, 750 HP, w/o Trans Control

Mr Gasket 9815 Oil Filler Cap Plug, Push-In Style

Related Articles

Total Seal Fixed Size Hard Piston Ring Compressor, Aluminum

Proform 67100C 650-800 CFM Holley Carburetor Main Body

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -8 AN

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black, -12 AN

Storage -16 AN Flare Fitting Cap, Pack of 4

Mr Gasket 200104-BL -4 Straight Push-On Hose Ends, Black

Vintage Air 15111VCB Top Mount Compressor Brackets

Vintage Air 151371-BCA BBC With Long Pump Side-mount Brackets

HDPE Sealing Washers for Bulkhead Fittings

Nickel Straight Flare to Pipe Adapter Fitting, -10 AN to 3/8 Inch NPT

Proform 141-146 Slant-Edge Alternator, GM 10SI, 100 Amp, Black

Proform 141-152 Slant-Edge Alternator, GM 10SI, 100 Amp, Black

Fragola 495108-BL O-Ring -12AN Hose to -10AN Port Fitting

Goodridge AN921-10DBLK -10 AN to -10 Port Fitting, 90 Degree, Black

Russell 670360 Fuel Pressure Takeoff Fitting -10 AN Male to Female 1/8

Male Steel 37 Degree AN Flare Weld Bung Fitting, -4 AN

Aluminum Allen Pipe Plugs, 3/8 Inch NPT

Aluminum Allen Pipe Plugs, 1/2 Inch NPT

Vintage Air 22400-VCQ BBC Proline Water Pump Pulley Double Groove

Fragola 495023-BL 90 Black Press Gauge Fitting 1/8 Fem -4 AN Male

Speedway Full Flow Swivel Hose End Fitting, Straight, Nickel, -8 AN

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -6 AN

Black 90 Degree -4 AN Flare to 1/4 Inch NPT Pipe Adapter Fitting

Speedway 90 -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting

45 Degree Flare Adaptor, AN8 to 3/8 Inch NPT

45 Degree Flare Adaptor, AN10 to 1/2 Inch NPT

Aluminum Flare Bulkhead Fitting, 90 Degree, -4 AN

Fragola 483304-BL AN Flare Bulkhead Fitting, -4 AN, 90 Degree

Aluminum Tee Bulkhead Fitting, -3 AN

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Aluminum Allen Pipe Plugs, 3/4 Inch NPT