1966 Chevy K20 Engine Parts

6,933 products fit your

1966 Chevy K20

Add Engine

Show Direct Fit Parts

6,933 products

Sort By:

Clear All

Fitment

1966 Chevy K20

Products

Edelbrock |

#3251206

Edelbrock 1206 Pro-Flo Air Cleaner, Round, Dropped Base

Shape:

Round

Overall Diameter:

14"

$71.95

/each

Total Seal |

#718RC00

Total Seal Fixed Size Hard Piston Ring Compressor, Aluminum

(3)

Material Type:

Aluminum

Adjustable:

Finish:

Anodized

$49.33

/each

-7%

Earls |

#425312006ERL

Earls 312006ERL Auto Fit Female Hose End, 120 Degree, -6 AN to -6 AN

Fitting Hose Size:

-6 AN

Fitting End A:

-6 AN Female

Fitting End B:

-6 AN Hose

$31.65

/each

$34.23

-30%

Money Saver Alternator Dress Up Kit, Ford

Tuff Stuff |

#91067163

Money Saver Alternator Dress Up Kit, Ford

Alternator Pulley Included:

Yes

Finish:

Chrome

Sold in Quantity:

Set

$62.99

/set

$90.59

Speedway Replacement Nitrile O-Rings for -4 AN Fittings, Pack/10

Speedway Motors |

#6173473

Speedway Replacement Nitrile O-Rings for -4 AN Fittings, Pack/10

AN Size:

-4 AN

Material Type:

Nitrile Rubber Composite

Fitting Size 1:

-4 AN 0.351

$4.49

/bag

Historic Chevy Performance Engines

Take a look at a few of the rare and wonderful Chevy engines in the Museum of American Speed!

55 Chevy Engine Build

Derek kicks off his 55 Chevy rebuild with a fresh small block.

1966 Chevelle

Sometimes, a simple paint job can cause a project to spiral out of control. In the case of Steve's '66 Chevelle, it came out way better than anyone expected.

1946 Ford Sedan Delivery Engine Detail

Speedway Motors Product Manager Jeff K. talks about how to really make your engine bay stand out from the crowd with just a little patience, and some Speedway products.

How to Install a Big Block Engine - 1967 Chevelle

Jeff tackles the task of installing a Big Block Engine into his 1967 Chevelle. Read about the hardships he faced and some of the tricks he learned to make this installation run smoothly.

1967 Firebird Engine Refurbish

Follow this restoration guide as Josh breathes new life back into his Pontiac engine.

Front Suspension and Rolling Chassis | 1968 C10 Build Episode 3

In Episode 3 of our C10 build, we install a front suspension kit and finally have a rolling chassis!

Lowering a 1967 Chevelle

In this Tech Tip, John offers some suggestions about lowering a 1967 Chevelle.

Installing a Front Runner Drive System - 1967 Chevelle

Jeff demonstrates how to install the front runner drive system by Vintage Air in his 1967 Chevelle project car all while maintaining a simple, factory fresh look.

1967-1972 Chevy C10 Pickup Lowering Guide

From a mild leveling to slammed and “in the weeds” there are several options to lowering a C10. We discuss the options in our ’67-’72 C10 lowering guide.

Speedway Replacement Nitrile O-Rings for -8 AN Fittings, Pack/10

Speedway Motors |

#6173475

Speedway Replacement Nitrile O-Rings for -8 AN Fittings, Pack/10

(1)

AN Size:

-8 AN

Material Type:

Nitrile Rubber Composite

Fitting Size 1:

-8 AN 0.644

$3.99

/bag

Stewart Warner |

#66582475

Stewart Warner 82475 Wings Mechanical Oil Pressure Gauge, White

(3)

Gauge Diameter:

2-1/16"

Gauge Series:

Analog

Gauge Style:

Mechanical

$86.99

/each

-75%

Aeroquip |

#6171513

Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN

Fitting Hose Size:

-8 AN

Fitting End A:

-8 AN Female

Fitting End B:

-8 AN Hose

$16.99

/each

$69.84

Speedway 90 -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting

Speedway Motors |

#61760860

Speedway 90 -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting

Fitting End A:

-8 AN Male

Fitting End B:

3/8" NPT Male

Angle:

90 degree

$19.99

/each

-11%

Holley |

#4253310

Holley 0-3310C 4160 Street 4 Barrel Carburetor, 750 CFM, Manual Choke

(2)

Carburetor Barrels:

4-Barrel

Fuel Type:

Gasoline

Choke Type:

Manual

$649.95

/each

$731.95

Edelbrock |

#3251412

Edelbrock 1412 Performer 4 Barrel Carburetor, 800 CFM, Manual Choke

(1)

Carburetor Barrels:

4-Barrel

Fuel Type:

Gasoline

Choke Type:

Manual

$565.95

/each

K&N 99-0533 Air Filter Oil, 8oz Squeeze Bottle

K&N |

#465990533

K&N 99-0533 Air Filter Oil, 8oz Squeeze Bottle

GTIN Code:

024844000293

$11.99

/each

Speedway Motors |

#94081100

Engine Rotator Handle

(1)

Material Type:

Aluminum

Finish:

Anodized

Color:

Black

$153.99

/each

-7%

Hooker 2301HKR Block Hugger Headers for ZZ4 Crate Motor, Ceramic Coat

Hooker Headers |

#9302300H

Hooker 2301HKR Block Hugger Headers for ZZ4 Crate Motor, Ceramic Coat

Header Tube Type:

Block Hugger

Exhaust Port Shape:

D-port

Flange Style:

Standard

$727.95

/pair

$787.95

Outerwears |

#56424565T

Outerwears Pre-Filters for Tapered Injection Filters

(4)

Shape:

Oval

Sold in Quantity:

Each

Overall Height:

6.25"

$23.05

/each

-54%

Aluminum Flare to Pipe Tee on Run Fitting, AN6 to 1/4 Inch NPT

Speedway Motors |

#6176112

Aluminum Flare to Pipe Tee on Run Fitting, AN6 to 1/4 Inch NPT

(1)

Fitting End A:

-6 AN Male

Fitting End B:

1/4" NPT Male

Fitting End C:

-6 AN Male

$7.39

/each

$16.12

-13%

Aluminum Flare Bulkhead Fitting, 45 Degree, -4 AN

Speedway Motors |

#324983704

Aluminum Flare Bulkhead Fitting, 45 Degree, -4 AN

AN Size:

-4 AN

Angle:

45 degree

Fitting End A:

-4 AN Male

$9.49

/each

$10.95

Industrial Tap, 7/16 Inch-20 SAE, Right Hand Thread

Speedway Motors |

#91281033

Industrial Tap, 7/16 Inch-20 SAE, Right Hand Thread

(1)

Thread Pitch:

7/16"-20

Thread Type:

RH Thread

$11.99

/each

Storage -16 AN Flare Fitting Cap, Pack of 4

Speedway Motors |

#54523811

Storage -16 AN Flare Fitting Cap, Pack of 4

Sold in Quantity:

Set

AN Size:

-16 AN

$6.49

/set

HDPE Sealing Washers for Bulkhead Fittings

Speedway Motors |

#6171097

HDPE Sealing Washers for Bulkhead Fittings

(4)

Gasket Material:

High Density Polyethylene

Sold in Quantity:

Pair

$3.49

/pair

Speedway Motors |

#6176037

Flare Union Adapter Fittings, -10 AN

Fitting End A:

-10 AN Male

Fitting End B:

-10 AN Male

Angle:

Straight

$10.99

/each

Speedway Motors |

#6176130

Aluminum Tee Bulkhead Fitting, -3 AN

(1)

AN Size:

-3 AN

Angle:

Tee

Fitting End A:

-3 AN Male

$19.99

/each

Straight Aluminum Bulkhead Flare Fitting, Blue, -10 AN

Speedway Motors |

#6176120

Straight Aluminum Bulkhead Flare Fitting, Blue, -10 AN

AN Size:

-10 AN

Angle:

Straight

Fitting End A:

-10 AN Male

$12.99

/each

Steel 45 Degree -4 AN to 1/8 NPT Male Adapter Fitting

Speedway Motors |

#324962304

Steel 45 Degree -4 AN to 1/8 NPT Male Adapter Fitting

(3)

Fitting End A:

-4 AN Male

Fitting End B:

1/8" NPT Male

Angle:

45 degree

$6.49

/each

-71%

Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree

Aeroquip |

#1061440

Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree

(2)

Fitting Hose Size:

-8 AN

Fitting End A:

-8 AN Female

Fitting End B:

-8 AN Hose

$18.99

/each

$67.82

-70%

Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree

Aeroquip |

#1061241

Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree

(3)

Fitting Hose Size:

-4 AN

Fitting End A:

-4 AN Female

Fitting End B:

-4 AN Hose

$16.99

/each

$57.40

Straight High-Flow O-Ring -8 AN Hose to -8 AN Port Fitting

Speedway Motors |

#6177013

Straight High-Flow O-Ring -8 AN Hose to -8 AN Port Fitting

(1)

Fitting End A:

-8 AN Male

Fitting End B:

-8 AN Male o-ring

Angle:

Straight

$13.99

/each

Shotgun Bill's Scoop® Aluminum Air Intake Scoop, Polished

Speedway Motors |

#92511907

Shotgun Bill's Scoop® Aluminum Air Intake Scoop, Polished

(8)

Overall Length:

19.50

Overall Width:

12"

Overall Height:

5.405"

$361.99

/each

Speedway Motors |

#91281034

Industrial Tap, 1/2 Inch-20 SAE

(2)

Thread Pitch:

1/2"-20

Drill Bit Included:

Material Type:

Steel

$19.49

/each

Longacre |

#47545243

Longacre® 52-45243 Caliper Fitting - 1/8 NPT x -3 AN Straight

Fitting End A:

-3 AN Male

Fitting End B:

1/8" NPT Male

Angle:

Straight

$9.19

/each

Titan Tools |

#72845207

Titan Tools 45207 Hose Clamp Assortment, 20 Piece

(3)

Style:

Worm Gear

Material Type:

Steel

Color:

Natural

$15.99

/box

Speedway Motors |

#1351484

Lynx Styled Air Cleaner

(6)

Shape:

Triangular

Material Type:

Steel

$26.99

/each

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Speedway Motors |

#61761811

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Angle:

Straight

Fitting End A:

-8 AN Male

Fitting End B:

-12 AN Male

$15.99

/each

Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

Speedway Motors |

#61760791

Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

(4)

Fitting End A:

-3 AN Male

Fitting End B:

1/8" NPT Male

Angle:

90 degree

$18.49

/each

Holley |

#427122

Holley Main Jets

(27)

Material Type:

Brass

Sold in Quantity:

Pair

$14.87

/pair

Lisle |

#21238350

Lisle Corporation 38350 Exhaust Rubber Hanger Removal Pliers

(1)

Sold in Quantity:

Each

Material Type:

Steel

$24.99

/each

Showing 1 - 1044 of 6,933 results

Shop Feedback:

Did you find what you are looking for?

1966 Chevy K20 Engine Parts

Subcategory

Part

Brand

Transmission Family

Availability

Engine Family

Discounts

Price

Customer Rating

Products

Edelbrock 1206 Pro-Flo Air Cleaner, Round, Dropped Base

Total Seal Fixed Size Hard Piston Ring Compressor, Aluminum

Earls 312006ERL Auto Fit Female Hose End, 120 Degree, -6 AN to -6 AN

Money Saver Alternator Dress Up Kit, Ford

Speedway Replacement Nitrile O-Rings for -4 AN Fittings, Pack/10

Related Articles

Speedway Replacement Nitrile O-Rings for -8 AN Fittings, Pack/10

Stewart Warner 82475 Wings Mechanical Oil Pressure Gauge, White

Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN

Speedway 90 -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting

Holley 0-3310C 4160 Street 4 Barrel Carburetor, 750 CFM, Manual Choke

Edelbrock 1412 Performer 4 Barrel Carburetor, 800 CFM, Manual Choke

K&N 99-0533 Air Filter Oil, 8oz Squeeze Bottle

Engine Rotator Handle

Hooker 2301HKR Block Hugger Headers for ZZ4 Crate Motor, Ceramic Coat

Outerwears Pre-Filters for Tapered Injection Filters

Aluminum Flare to Pipe Tee on Run Fitting, AN6 to 1/4 Inch NPT

Aluminum Flare Bulkhead Fitting, 45 Degree, -4 AN

Industrial Tap, 7/16 Inch-20 SAE, Right Hand Thread

Storage -16 AN Flare Fitting Cap, Pack of 4

HDPE Sealing Washers for Bulkhead Fittings

Flare Union Adapter Fittings, -10 AN

Aluminum Tee Bulkhead Fitting, -3 AN

Straight Aluminum Bulkhead Flare Fitting, Blue, -10 AN

Steel 45 Degree -4 AN to 1/8 NPT Male Adapter Fitting

Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree

Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree

Straight High-Flow O-Ring -8 AN Hose to -8 AN Port Fitting

Shotgun Bill's Scoop® Aluminum Air Intake Scoop, Polished

Industrial Tap, 1/2 Inch-20 SAE

Longacre® 52-45243 Caliper Fitting - 1/8 NPT x -3 AN Straight

Titan Tools 45207 Hose Clamp Assortment, 20 Piece

Lynx Styled Air Cleaner

Aluminum Flare Reducer Adapter, Black, -8 AN to -12 AN

Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting

Holley Main Jets

Lisle Corporation 38350 Exhaust Rubber Hanger Removal Pliers