1966 Chevy K10 Electronic Throttle Controls

Our friends at FiTech created this handy guide to help with that critical throttle adjustment and IAC setting...

In this Tech Tip, John responds to a customer question about tubular control arms.

Blown 1966 Chevy C10 built for cruising.

Next up is the suspension on Jeff's 1967 Chevelle project. Learn how to properly disassemble and remove components, such as the spindles and brakes. See tips on replacing the control arm bushings and using the right tools to get the job done.

How to lower a C10 Chevy truck with lowering coil springs and install a front end rebuild kit. Upgrade your broken, rusty, or saggy suspension with our guide.

Follow this detailed guide on installing a FiTech EFI system in a '67 Chevelle. Learn helpful tips along the way including how to route the blue trigger wire away from the coil and ignition system.

From a mild leveling to slammed and “in the weeds” there are several options to lowering a C10. We discuss the options in our ’67-’72 C10 lowering guide.

Old trucks are just meant to have manual transmissions. They're made even better with a modern overdrive like a Tremec TKX. Watch our C10 manual transmission conversion on an LS-swapped '68 to see just how easy it is to row your own gears,

Jeff demonstrates how to install the front runner drive system by Vintage Air in his 1967 Chevelle project car all while maintaining a simple, factory fresh look.

This article highlights the finishing touches of the front suspension in Jeff's Chevelle. Learn some tips on how to install the steering arms, center link and tie rod assembly.