1956 Studebaker E7 Starter Mounting Hardware

Little is thought of your engine’s starter until it refuses to turn your engine over at the worst possible moment. Today’s powerful mini starters can crank the biggest engines with ease. Learn how in our buyer’s guide.

To keep this project moving forward, Jeff installs a gear reduction mini starter on his big block. See how to apply the mini starter on 153 or 168 tooth flexplates.

Learn how to keep your starter cool using a heat shield. Read the steps and parts necessary for the installation.

Kevin W. walks through each step of installing a new alternator bracket on a 454 Big Block Chevy.

Follow this guide on installing a Speedway Motors Billet LS Alternator Bracket. If you’re looking for a simple solution that looks good while solving positioning issues from factory brackets, then these brackets are for you.

Next up for Jeff's 1967 Chevelle is fuse block mounting and wiring. View this guide on how to remove old wiring to installing a new fuse block and 22 circuit wiring harness.

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.

In this Tech Tip, John responds to a customer request for our recommendations on brake kits for his ’56 F100.

Jeff tackles the task of installing a Big Block Engine into his 1967 Chevelle. Read about the hardships he faced and some of the tricks he learned to make this installation run smoothly.

Follow this detailed guide on installing a FiTech EFI system in a '67 Chevelle. Learn helpful tips along the way including how to route the blue trigger wire away from the coil and ignition system.